1 / 1
DN-30 Dock for Apple Watch (wireless charging dock w/ slot for charger)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This minimalistic Apple Watch wireless charging dock lets you easily charge your Apple Watch.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This dock was designed so that you can easily put your Apple Watch on charge.
Assembly:
- Remove any supports from the print
- Thread the Apple Watch wireless charger through the cut-out and up into the base. If it doesn't fit, you may need to cut, sand, or edit your print settings to let it fit in. It should be a friction fit, but if not you can always prop it up.
- Check if your watch will magnetically attach & charge. If not, then consider printing the alternate model with only 1mm of walls between the charger & the watch.