Voron Side fan support mount for 3x WAGO 221-413
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of Dr-Info's Lever Connector Mount Side Fan Support to hold 3x WAGO 221-413 terminals instead of 2.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I wanted to use Noctua's 5V PWM fans with my LDO Leviathan board, and in order to save space on the DIN rails, I wanted to use the Wago mount designed by Dr-Info. However, the mount only holds 2x Wago 221-413 terminals whereas I needed a 3rd wire for the PWM control. So I borrowed heavily on Dr-Info's design and measurements to design a new holder for 3x Wago 221-413.
Take note that the lowest connectors on the either side of the M5 mounting hole are partially obstructed by the mounting block and will not be able to open fully, but they will still open enough for the wires to be inserted. Just take care not to force the lever open too much or it will break (this happened to me).
You will need to replace the M5x10 button screw with a M5x14/15 to use this mount.
Take note also that the mount will be visible from the outside of the skirt, so use it only if you are not too worried about the aesthetics! :)