1 / 2
Piano Pedal - Anti-Slip - Rubber Mat
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is bracket to place a piano pedal on a rubber mat to avoid slipping.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
This bracket holds a yamaha e-piano sustain pedal.
The bracket is screwed to a rubber mat, which your foot can rest on.
Parts required
- Rubber mat: 58 cm x 11,5 cm x 3,5 mm
- Four M4 x 16 screws and M4 nuts
- The printed bracket
Print instructions
I printed the bracket in
- PETG
- with 4 perimeters wall thickness
- in 0.2 mm layer height.
Assembly instructions
Cut the rubber mat to the given size, above.
Cut two stripes of 28 mm width at the front and fold them into the bracket.
Drill through the rubber mat with a 4,5 mm drill.
Secure the mat with four M4 x 16 bolts and nuts.
Remix welcome
The FreeCad file is attached for your remixes.
