USB-C Power Supply Case for Buck Boost Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the for WZ3605E Buck Boost Module, including a USB-C port to power from a Phone Charger or USB-C Battery pack
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This model is a case to turn the WZ3605E Buck Boost Module into a very usable bench power supply. It can also be made portable by powering it from a USB-C battery pack.
The module I used is this one: https://de.aliexpress.com/item/1005003832850280.html
The USB-C port 20V module I used is the 20V version of this product: https://de.aliexpress.com/item/1005006225199607.html
The Banana Jacks I used are these: https://de.aliexpress.com/item/1005005988853903.html
Be sure to deburr the edges of the USB-C module. Screws used in this build are all M2x10mm countersunk self-tap screws.
My printer mangled the screw holes, as they're printed at a 45 degree angle. You will also probably need to drill them out with a 1.5mm bit to get the screws in.