USB-C Power Supply Case for Buck Boost Module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the for WZ3605E Buck Boost Module, including a USB-C port to power from a Phone Charger or USB-C Battery pack
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 59
- Makes
- 0
- Views
- 385
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This model is a case to turn the WZ3605E Buck Boost Module into a very usable bench power supply. It can also be made portable by powering it from a USB-C battery pack.
The module I used is this one: https://de.aliexpress.com/item/1005003832850280.html
The USB-C port 20V module I used is the 20V version of this product: https://de.aliexpress.com/item/1005006225199607.html
The Banana Jacks I used are these: https://de.aliexpress.com/item/1005005988853903.html
Be sure to deburr the edges of the USB-C module. Screws used in this build are all M2x10mm countersunk self-tap screws.
My printer mangled the screw holes, as they're printed at a 45 degree angle. You will also probably need to drill them out with a 1.5mm bit to get the screws in.