PG7 Mount for Voron 2.4/Stealthburner with Galileo 2 Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an PG7 Mount (umbilical setup) for Voron2.4/Stealthburner with an Galileo 2 Extruder
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 811
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I needed a PG7 Mount for my Voron 2.4 Formbot Kit which came with an umbilical setup. Since I feared that the sharp endings of the piano wire would scratch through the isolation of the canbus cable when used on its own I decided to put the 0.8mm steel wire into a bowden tube. I added a 4mm hole into the PG7 mounts of the Voron to place the bowden-pianowire-umbilical into. Since I built my Voron with an Galileo 2 extruder I also redesigend the PG7 Mount of the Galileo2 extruder since the ones I printed first tend to interfere with the back of my printer. The design also has the 4mm hole for the bowden-pianowire-umbilical.