PG7 Mount for Voron 2.4/Stealthburner with Galileo 2 Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an PG7 Mount (umbilical setup) for Voron2.4/Stealthburner with an Galileo 2 Extruder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 69
- Makes
- 0
- Views
- 811
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I needed a PG7 Mount for my Voron 2.4 Formbot Kit which came with an umbilical setup. Since I feared that the sharp endings of the piano wire would scratch through the isolation of the canbus cable when used on its own I decided to put the 0.8mm steel wire into a bowden tube. I added a 4mm hole into the PG7 mounts of the Voron to place the bowden-pianowire-umbilical into. Since I built my Voron with an Galileo 2 extruder I also redesigend the PG7 Mount of the Galileo2 extruder since the ones I printed first tend to interfere with the back of my printer. The design also has the 4mm hole for the bowden-pianowire-umbilical.