1 / 1
3 * 5″ (76 * 127mm) index card holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Index card holder with a displaying slot and a magnetic divider
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It was inspired by Ugmonk's Analog system and Jonathan Kutscher's Gridfinity Ugmonk Analog Holder. I modeled it from scratch to learn parametric design in Autodesk Fusion.
It's designed for 3 * 5″ or 76 * 127mm index cards. It can fit cards with sharp square corners. It comes with a divider that magnetically snaps to the card holder body. They are designed to fit 5 * 2mm magnets.
Print settings:
- Layer height: 0.16mm (adaptive layer height to reduce print time).
- Wall loops: 2 is fine.
- Top and bottom shell layers: 4 and 3 (assuming top/bottom layers with ~0.28mm height, adjust the layer counts for thickness appropriately)
- Sparse infill: 15% Gyroid (other patterns are also fine)