1 / 1
3 * 5″ (76 * 127mm) index card holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Index card holder with a displaying slot and a magnetic divider
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 21
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It was inspired by Ugmonk's Analog system and Jonathan Kutscher's Gridfinity Ugmonk Analog Holder. I modeled it from scratch to learn parametric design in Autodesk Fusion.
It's designed for 3 * 5″ or 76 * 127mm index cards. It can fit cards with sharp square corners. It comes with a divider that magnetically snaps to the card holder body. They are designed to fit 5 * 2mm magnets.
Print settings:
- Layer height: 0.16mm (adaptive layer height to reduce print time).
- Wall loops: 2 is fine.
- Top and bottom shell layers: 4 and 3 (assuming top/bottom layers with ~0.28mm height, adjust the layer counts for thickness appropriately)
- Sparse infill: 15% Gyroid (other patterns are also fine)