1 / 1
Sandisk Ultra USB 3.0 Shell (untested)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
OK, so I'm a dummy. I drew this up in OpenSCAD, then realized I have a different stick when I was finished. Try at your own risk, I DID NOT PRINT AND TEST THIS. I took over the dimensions 1:1 from the original model, so good chance it will work. Maybe it helps someone down the line.
Comes with a cap (which will not hold on as it is, you need to glue in a bit of rubber for friction fit or adjust the design). Of course you can easily modify the tolerances in OpenSCAD, remove the hole for the LED or keyring etc. There's a version for 3x2mm cylindrical magnets to affix the cap.