1 / 1
Sandisk Ultra USB 3.0 Shell (untested)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
OK, so I'm a dummy. I drew this up in OpenSCAD, then realized I have a different stick when I was finished. Try at your own risk, I DID NOT PRINT AND TEST THIS. I took over the dimensions 1:1 from the original model, so good chance it will work. Maybe it helps someone down the line.
Comes with a cap (which will not hold on as it is, you need to glue in a bit of rubber for friction fit or adjust the design). Of course you can easily modify the tolerances in OpenSCAD, remove the hole for the LED or keyring etc. There's a version for 3x2mm cylindrical magnets to affix the cap.