P
PrintablesPanagiotis Festas
Sandisk External ssd case
Printed in PETG but PLA is fine also I assume.
- Downloads
- 78
- Likes
- 5
- Rating
- 0
Search results: sandisk
Counting matching models…
P
Printables
Sandisk Ultra USB 3.0 Shell (untested)
OK, so I'm a dummy. I drew this up in OpenSCAD, then realized I have a different stick when I was finished. Try at your own risk, I DID NOT PRINT AND TEST THIS. I took over the dimensions 1:1 from the original model, so good chance it…
P
Printables
SanDisk Cruzer Ultra minimal shell
Minimal protective shell for SanDisk Cruzer Ultra with a broken case. First you need https://www.printables.com/model/452052-usb-stick-repair-sandisk-cruzer-ultra by Willi, then just slip the cover on. You can add a dab of glue, but it's…
P
Printables
SanDisk SSD Extreme Protective Case
SanDisk SSD Protective Case with cable and USB adapter storage. Designed for SanDisk Model: SDSSDE61 Tested and Fits: 1 TB & 2 TB SSD The SSD slides into the protective cover and is held in firmly by a friction fit. The slide-on cover…
P
Printables
Sandisk quickflow case
The sandisk quickflow microsd reader is very fast but it is a lot bulkier than I'd like and has no way to attach to a keychain. So I made my own case. The sleeve is supposed to be printed in vase mode (with 0.8mm of bottom layers), adjust…
P
Printables
SANDISK SANSA SPORT CLIP GO COVER
I would not print the clip on the back, or make it have a lot of infill, mine broke off and I glued it back on.
P
Printables
MicroSD (SanDisk Adapter) Ikea Skadis mount
The slot is designed on the underside for easier and faster removal of the card.
P
Printables
Sandisk SSD extreme sleeve
A sleeve storage for ssd , usb connection is accessible , printed standing up, with fuzzy setting .
P
Printables
SanDisk SSD laptop holder (Brass Inserts)
SanDisk SSD holder with increased hole sizes to accommodate brass inserts.
P
Printables
Sandisk SSD support for Ikea Skadis
Here is a 3 part bracket that is simple to print for a sandisk ssd. It fits Ikea Skadis plates.
P
Printables
Sandisk Ultra USB 3.0 Shell (untested)
OK, so I'm a dummy. I drew this up in OpenSCAD, then realized I have a different stick when I was finished. Try at your own risk, I DID NOT PRINT AND TEST THIS. I took over the dimensions 1:1 from the original model, so good chance it…
P
Printables
SanDisk Cruzer Ultra minimal shell
Minimal protective shell for SanDisk Cruzer Ultra with a broken case. First you need https://www.printables.com/model/452052-usb-stick-repair-sandisk-cruzer-ultra by Willi, then just slip the cover on. You can add a dab of glue, but it's…
P
Printables
EXTERNAL STORAGE HOLDER (SANDISK)
An external drive holder for labtop (Sandisk SSD) Print vertically for better endurance. (with supports) I have used superglue and mounted it on top of a sacrificial sticker on my MacBook. Print with 100% infill.
P
Printables
SanDisk E61 Strorage Save Box
The SanDisk E61 portable hard drive is very compact, but its data cable and adapter are easy to lose when stored separately. So, I designed this protective case, which not only protects the E61 hard drive but also stores the data cable…
P
Printables
Sandisk Extreme Portable Case
Case for Sandisk Extreme Portable to protect and carry usb cables with it.
P
Printables
Sandisk Extreme SSD USB and Cable Holder
This is a simple little print that I found very useful for keeping the USB adapter and cable organised/together with the SSD. I printed this in Overture TPU. It prints in under 20 minutes in TPU. It prints in under 10 mins in PLA/PETG.…
P
Printables
SanDisk Extreme PRO Portable Case (SDSSDE81)
Please print with 6 wall loops, don't be shy with plastic, this is a case, it needs to be strong. Print it like on the last picture, this is the best way. Supports are very easy to remove, don't be afraid using them. I didn't found the…
P
Printables
SanDisk Pro Card Reader Underdesk Mount
I needed to mount my SanDisk Pro Card Reader under my desk. Working fine. Printed in PETG, but PLA will also work fine
P
Printables
Standfuss Fritzbox mit externer SSD-Festplatte Sandisk
Abgewandelter Standfuß um eine SSD-Festplatte mit anzubringen https://www.printables.com/model/296446-stand-for-fritzbo
P
Printables
The New Sandisk Logo Keychain
I really liked SanDisk's new logo, so I took the logo and 3D-modeled it to make a keychain. Now I'm making it available for everyone to print and have fun with. Model V1 has slightly rounded corners. Model V2 features more rounded corners…
P
Printables
SanDisk Extreme Portable SSD (SDSSDE61-1T00) Compact Case - Redesign with port and better fit
This is a complete redesign of this great concept with a added exposed port for the cable and a slight fit change.
P
Printables
SanDisk Extreme Portable SSD Holder
Deutsch Mich störte, dass die Portable SSD so rum hing am IMAC, worauf ich mal ein halter erstellt habe, um dieses Problem aus den weg zu schaffen. Der halter sollte nicht nur am IMAC funktionieren, bestimmt auch an div. PCs / Monitore.…
P
Printables
SanDisk SSD
Comodo organizer per tenere tutto a portata di mano. Convenient organizer to keep everything at hand. Materiale TPU
P
Printables
Replacement shell for SanDisk Ultra Dual
works for the model that looks like this. tested on a 64gb print without supports with usb-c hole facing down like how the stl imports. might be able to skip a brim if you print slow enough and have good enough bed adhesion. insert drive…
P
Printables
SanDisk SSD Cover
material: TPU 100% infill SANDISK Portable SSD - USB 3.2 Gen 2 Festplatte, 2 TB or 1TB
P
Printables
Simple Sandisk USB 32gb Case
Easy to print model, designed for 32gb Sandisk Cruzer Blade USB but would probably work with the other storage sizes too. The chip comes from the inside of the two halves of the original sandisk case and clips into the new 3d printed one.…
P
Printables
Sliding Sandisk Cruzer Blade USB Replacement Case
Simple print, looks great, should be printed in multiple colours, the chip clips in great and to get it, simply snap open the original sandisk case and pull out the USB part of it and then slide it into place in its new home, should take…
P
Printables
Replacement clip for Sandisk Sansa Clip Zip
A replacement clip for the Sandisk Sansa Clip Zip MP3 player. Printed vertically in PETG for best strength. Supports needed when printing vertically (no supports needed when printing horizontally, back side on the bed). The hole for the…
P
Printables
SanDisk Extreme Portable SSD Holder for HP ProDesk Mini G4
This is a convenient, sturdy mount designed specifically for attaching the SanDisk Extreme Portable SSD to your HP ProDesk Mini G4. Keeping your workspace organized, it securely holds the SSD in place, optimizing airflow and…
P
Printables
Gridfinity 2.5 '' SSD and HDD Box (Crucial, Hitachi, Intenso, Samsung, SanDisk, Seagate, Toshiba, etc.)
Gridfinity Boxes to store up to 12x 2.5 '' SSDs and up to 10x 2.5 '' HDDs. There are different Sizes of boxes for different amount of SSDs and HDDs to fit your needs. Sizes The first number set is the size of the Gridfinity Box. There are…
P
Printables
SanDisk SSD Extreme Protective Case
SanDisk SSD Protective Case with cable and USB adapter storage. Designed for SanDisk Model: SDSSDE61 Tested and Fits: 1 TB & 2 TB SSD The SSD slides into the protective cover and is held in firmly by a friction fit. The slide-on cover…
P
Printables
SanDisk SD card reader console
Simple console for a SanDisk card reader to be mounted under desktop.
P
Printables
SanDisk Extreme Portable Case
A slim case for the SanDisk Extreme Portable SSD, It fits very well inside. Printed with 15% infill.
P
Printables
Gridfinity Bin for SanDisk Extreme PRO Portable SSD (1TB + Cable)
Custom Gridfinity storage bin designed for the SanDisk Extreme PRO Portable SSD (1TB, 4.34” × 2.26” × 0.4”) . Left slot: fits the SSD snugly Right slot: holds the USB-C cable Keeps your drive and cable organized, secure, and always ready…
P
Printables
Easy-to-print modular organizer for SanDisk Pro-Blade SSD drives!
This is a modular stand designed for SanDisk Pro-Blade SSD drives. The organizer can be easily expanded by connecting multiple parts together, so you can build exactly the size you need. Modular design – add more sections to increase…
P
Printables
SanDisk Portable SSD Case
The size is optimized for printing with 90A/95A TPU. If you use 98A you may scale the model to 101%
P
Printables
Sandisk Sansa Clip+ replacement frame
I finally finished my player mod; it's only been a week. The stock battery showed 110 mAh under electronic load, and it lasted 13 hours on a Rockbox. This battery is from a 1000 mAh disposable cigarette(112040 format size), so I wonder…
P
Printables
SanDisk Extreme Portable SSD (SDSSDE60) - More space for cabel
Remixed case with more space for cable.
P
Printables
SanDisk Extreme Portable SSD Holder - Tether Tools - AeroTrac Workstation
I wanted to have a custom SSD holder for when I use my AeroTrac table. Printables AeroTrac Base ( https://www.printables.com/model/1406318-aerotrac-workstation-system-track-base ) Printed with PETG, 3 walls, 25% infill. Print vertical…
P
Printables
3 Flash drive storage case with lid for SanDisk Ultra Dual Drive Luxe USB A C Flash Drive
I made these for the SanDisk Ultra Dual Drive Luxe USB A C flash drives. The cases will hold up to 3 of them total. Opening for drives is 46 x 13.5 mm and 9 mm deep. External dimensions is 56 mm square and 15 mm tall for rev 2 and 3. I…
P
Printables
Sandisk Extreme Fit USB-C Storage Box
If you prefer, one suggestion would be to put foam on top. But you can use the printed top.
P
Printables
SanDisk Extreme Portable SSD (SDSSDE61) Compact Case - Port Exposed & Port Exposed with Screw Hole for Mounting
If you're looking for a mounting option for your SanDisk Extreme Portable SSD (SDSSDE61-xT00), this might be what you're looking for! Intended for use with a standard 1/4" x 1/2" wood screw (about 6.3mm x 12.4mm) you can get at any…
P
Printables
Color Accent for SanDisk Ultra Dual Drive Luxe
Small color accent that makes it easy to tell otherwise identical usb thumb drives apart. Materials You can print these in any material you like. It's designed to be a very tight fit, in order to make sure they don't fall out. You may…
P
Printables
SanDisk Extreme PRO Portable SSD (SDSSDE81) - Desk / Wall screw mount
There are two version available. I use the snug version as I don't take my drive often, but if you do, try the loose version first.
P
Printables
Improved enclosure for sandisk cruzerblade
an enclosure for a sandisk pendrive using a single chip disk.
P
Printables
Sandisk quickflow case
The sandisk quickflow microsd reader is very fast but it is a lot bulkier than I'd like and has no way to attach to a keychain. So I made my own case. The sleeve is supposed to be printed in vase mode (with 0.8mm of bottom layers), adjust…
P
Printables
Fake Flash Drive - SanDisk
This is a 3D printable replica of a SanDisk 64GB USB flash drive, perfect for use as a prank, a movie prop, or a simple fidget toy. The model is designed for easy printing without supports. The highlight of this model is the embossed…
P
Printables
SanDisk Cruzer Glide Minimal Case
Building an unRAID server currently involves putting a usb stick in your server and leaving it there... forever. USB3.0 or newer, while faster, has a tendency to get hot, so I would prefer my always-in-use drive to be USB2.0. I grabbed an…
P
Printables
SANDISK SANSA SPORT CLIP GO COVER
I would not print the clip on the back, or make it have a lot of infill, mine broke off and I glued it back on.
P
Printables
Sandisk Extreme Portable Case 1 TB Version
I remixed Yunus Demirs model Sandisk Extreme Portable Case to make the shorter cables of the 1 TB Version also fit.
P
Printables
Sandisk PRO-G40 Mount
If you've got a PRO-G40 and wanted to mount it cleanly to your PC case's side panel mount points, you're not alone — and you've probably already noticed there's nothing out there for it. Every existing SanDisk holder is designed for the…
P
Printables
SanDisk Dual Go Case
SanDisk Dual Go drives are basically my go-to for USB drives. Over the years, I've amassed more than a handful and was tired of finding them all over the house, in pockets in the laundry, etc. So I decided to print up a little case that…
P
Printables
Atomos SSD caddy for Sandisk Ultra 3D 500GB drive
Generally, there are two types of media that can be used with the Ninja V and other Atomos recorders using a similar caddy design - expensive AtomX drives that fit nicely in the slot and inexpensive caddies which accept a SATA SSD, but…
P
Printables
Sandisk Ultra Duo replacement shell housing
Not long ago, my shell housing broke for this USB thumb drive, and I never use the micro-USB side of it, so I decided to design a replacement shell that would work for hiding the micro-USB and allow the USB-A port to be used. Disclaimer,…
P
Printables
SanDisk Cruzer Blade Case with Name, Capacity & Animated Logo
I made this case for my friend who had a Cruzer Blade pen drive with a broken case and wanted to fix it, but I pushed it further by adding his name initials, capacity and an awesome glowing orange Pikachu logo on the back. Behind the…
P
Printables
Cable and Adapter Clip for SanDisk Extreme Pro SSD
This is a simple print that holds together the USB-C cable and USB-A adapter that come included with the SanDisk Extreme Pro SSDs. I wanted to keep the two accessories together but other designs were a lot bigger than I wanted. I just…
P
Printables
Gridfinity SanDisk Extreme SSD Holder
Simple holder for 1TB SSDs using the Gridfinity system by Zack Freedman . Fits up to 3 SanDisk Extreme SSDs for all your storage needs. Leave any suggestions below. Thanks!
P
Printables
Sandisk Ultra Dual mod / case (latch broken)
My USB drive latch had been broken so i made a case for drive itself. You need 1 M2*3mm screw with head smaller than 4.5mm. Screw set with this screw type: Aliexpress , Amazon.com , Amazon.de . Version 2: redesigned the case so the USB-c…
P
Printables
Replace case for SanDisk ultra dual USB-C
If you have this flash drive with broken slider, you can make simple case and continue of use it. PETG, 2 perimeters.
P
Printables
Sandisk Extreme SSD Holder
Instead of having a bunch SSDs piled up on my work desk, I made this little storage tray to hold them tidily. It will hold 5 drives of varying sizes, there's a Sandisk Extreme & Extreme Pro in the photo with storage from 500gb to 2tb.…
P
Printables
Sandisk Extreme SSD Security Sheath. "SESSDSS"
3D print this Sheath, and with the help of a lock, you can prevent people from using/reading the data inside your Sandisk external SSD. I wouldnt actually recomend this for real security, it was made as a joke, so that you can give to the…
P
Printables
Gridfinity Sandisk SSD Holder + Storage
Remix of the SSD Holder from @giostealth, but with only one place for the SSD and one bigger part for storage. Printed with PLA at 0,16mm, but 0,2 will work just fine. note: newer models of the SanDisk SSDs have bigger dimensions, so you…
P
Printables
Sandisk Cruzer U Case
Just a simple case for a Sandisk Cruzer U thumbdrive. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Filament: Prusa Filament PLA Silver Category: Computer
P
Printables
SanDisk portable SSD USB-C dust cap with keeper
SanDisk portable SSD USB-C port dust cap. This will help keep out dust and lint from ruining the USB-C port of your SSD drive.
P
Printables
Usb Stick repair SanDisk Cruzer Ultra
A spare part for repairing SanDisk Cruzer Ultra USB stick. Parts are simply plugged together.
P
Printables
SanDisk Extreme Portable SSD storage
Hey there! This a box/mount to store my SanDisk Extreme Portable SSD mounted on a vertical part of a shelf. It was designed to clamp onto a vertical part of a shelf with a width of 16mm, but you can edit the step file to tune it for other…
P
Printables
USB-C Hub mit SanDisk Extrem-Platten-Hub
Zur besseren Ordnung meiner SanDisk Extrem-Flashspeicher und dem USB-C Hub habe ich dieses Modell erstellt. Es kann ohne Support gedruckt werden. Es wurde folgender USB-C-Hub verwendet:…
P
Printables
Sandisk SD Card Housing (Small Chip)
A replacement housing for Sandisk full sized SD card with the short 10mm long chip. The dummy chip is also included in the model. The intention of this was to create a housing to allow a card to be read and the data recovered, rather that…
P
Printables
SanDisk Extreme Portable holder for Skadis
Remixed holder of Sandisk SSD to fit on your Skadis board. Print instructions You are going to need Skadis Hook with Dovetail which slides into pockets on back of the holder. Gcode for PLA included in the files.
P
Printables
SanDisk Ultra-Fit USB-A Replacement Case
This model is a replacement casing for a USB-A SanDisk Ultra-Fit. This holds the tiny circuit board. The tight fit allows this case to be used without glue. The Fusion 360 parametric model is included if your printer requires different…
P
Printables
SanDisk Extreme Portable SSD Brace
Got tired of the cable bulk so I got a male to male usb c adapter and made two kinds of braces for the SanDisk Extreme Portable SSD. Mostly for when I'm connecting it to my laptop. One brace is just for the usb c adapter the other brace…
P
Printables
Sandisk iXpand Lightning Port Cover
Use This is a simple cover I made for my new SanDisk iXpand Drive. The flipping-mechanism still works, and it does a good job of protecting the port. The fit is snug, but you can still easily remove it. Origin As someone who doesn't like…
P
Printables
PK1 PROSTREAMER SSD holder for SanDisk SSD
SSD holder for SanDisk SSD drives, compatible ONLY with PK1 ProSteamer stands. It mounts on the Aluminium bars and can be positioned at any place. Print in PETG or PLA (matte) You can find the physical product here: ProStreamer SSD Holder…
P
Printables
Sandisk Ultra Dual Drive Go replacement case
This is a replacement case for the Sandisk Ultra Dual Drive Go as the original plastic shell degrades after prolonged use. For a longer life increase the layer adhesion by bumping the temp. For better results print in ABS or PETG. Please…
P
Printables
SanDisk Ixpand Exo Wireless Add-on
🚀 Elevate your Mobile Exo Suit game with the new SanDisk Ixpand Add-on!
P
Printables
Sandisk Extreme Pro USB Color Code
Introducing the ultimate solution for organizing your Sandisk Extreme Pro USB drives – the Sandisk Extreme Pro USB Cover. Designed with precision using Fusion 360, this sleek and efficient cover is a must-have for tech enthusiasts. Its…
P
Printables
Sandisk Ultra Dual USB Go USB Drive TPU Keychain Cover
I made this so you can insert the usb drive into the tpu holster and easily remove it for use. With this the USB drive is not attached directly to your keys and your keychain doesn't weigh on the usb port risking breaking it. Sandisk logo…
P
Printables
SanDisk Ultra Dual-Drive Go USB Type-C Sleeve and Clips
The SanDisk Ultra Dual-Drive Go USB Type-C are a little small to label and easy to misplace. :-) So created a sleeve (case) that provides an area to add a label, either with the slicer or sharpie. Then added a set of clips (holding from 1…
P
Printables
SanDisk Protable SSD Mount - Skadis
I really didnt like the existig one with the calbe stuffed in so i designed a new one :) fell free to remix etc.
P
Printables
Sandisk Cruzer Fit Case
Sandisk Cruzer Fit case compatibility with keychain and original cap. Printed in the orientation of the model with supports Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: Yes Resolution: 0.1 Filament:…
P
Printables
SanDisk Extreme SSD Rack (5 Slot)
My first upload! A tabletop rack to hold SanDisk Extreme SSD devices.
P
Printables
SanDisk Ultra Dual Drive (Magnet cap)
I added a keyring hole, grip texture and 4x magnet 4x1 mm.
P
Printables
SanDisk Image Mate All-in-One Card Reader Stand
A hybrid design using two printed stands and a section of 3mm x 20mm flat aluminium bar to hold them together. The aluminium also provides weight to stop it from moving around when inserting and removing cards. Print instructions Straight…
P
Printables
Sandisk Ultra Dual Type-C USB Case
Personally made unofficial model made for: Sandisk Ultra Dual Type-C USB
P
Printables
SanDisk Extreme V2 Mount ( SanDisk Extreme Rámeček)
Too you ever annoyed when your SSD Sandisk Extreme V2 keeps getting in the way? I have a solution for you! You can attach this product using three suction cups with a diameter of 20 mm to almost any surface, so it won't be in your way…
P
Printables
Sandisk Extreme SSD carrier
Box for 2 SandDisk Extreme SSD and accessorise (usb cord and USB 3 adapter). I added a space also for a microSD to SD adapter. My disks are 500GB and 1TB so one part is a little bit smaller. Remix Is permitted to feed any needs. Do you…
P
Printables
SanDisk SSD holder for PC
I have designed this model based on byron.seven's design. you need to buy these (20mm): https://shorturl.at/clq48
P
Printables
sandisk ultra usb 3.0 housing
Replacment sandisk ultra usb 3.0 flash drive housing Print Settings Printer Brand: RepRap Printer: p3steel Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.26 Infill: 100% Category: Replacement Parts
P
Printables
small sandisk pendrive shell
if you ever felt anoyed like me about sandisk's pendrives then my shell for them is perfect solution for you. i scaled it down as much as it was posible so you can put them in usb slots next to each other. it will take you about 10…
P
Printables
Sandisk SSD Stacker / Organizer
No more Sandisk SSD hanging around. Tidy your desk with this quick-to-print model. The screw is optional. Make sure you pick the model matching the number of disks you need to stack up. You will find models covering from 2 to 5 Sandisk…