SanDisk SSD Extreme Protective Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SanDisk SSD Protective Case with cable and USB adapter storage. Model: SDSSDE61 SSD can be used from inside the case.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 67
- Makes
- 1
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SanDisk SSD Protective Case with cable and USB adapter storage.
Designed for SanDisk Model: SDSSDE61
Tested and Fits: 1 TB & 2 TB SSD
The SSD slides into the protective cover and is held in firmly by a friction fit.
The slide-on cover stores the USB-C to USB-C cable and the USB-C to USB-A adapter.
Print Time: 1 Hour ( K1C )
material: PETG, PLA, ABS, ASA.
NO additional parts required.
Supports are not required, but are advised for a clean outcome for the overhang on the USB-C cut-out slot. I used the automatic tree supports, and that worked perfectly.
The protective case is 57mm X 106mm X 20mm ( roughly 5mm larger but double the thickness of the SSD.
For any issues or suggestions, please feel free to post a make/comment or message me and I will assist asap to the best of my ability. Happy Printing!!