Sandisk Extreme SSD Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for your Sandisk Extreme SSD.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 131
- Makes
- 0
- Views
- 1,114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Here's a case for your Sandisk Extreme Portable USB-C SSD. I wanted a case that was a little bit of protection, without adding too much bulk. It has 2mm walls. I've tested with 25% infill and with 100%. Since it's so compact, I'd recommend 100%. There just isn't a ton of space to be concerned about infill.
I'll likely be designing a second case that houses the drive and the attachments to the drive(cable, adapter).
This model uses 6mm x 3mm magnets. The magnet holes are set to 6.25mm, so they're a little loose, but stay in fine with some CA glue or super glue. Make sure to check your polarity before gluing.
Here are the magnets I used:
https://a.co/d/hu8GvTp