The BEST Spiral Impossible Vortex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a great model that is really fun to use as a fidget and to print! Enjoy!
- Ocena
- 4,8 / 5
- Polubienia
- 40
- Pobrania
- 766
- Wydruki
- 7
- Wyświetlenia
- 2121
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
What makes it special
A smooth, satisfying spiral fidget in a modern cone shape. It is a super easy print, and it is fun to watch the two spiral parts come together. Try different color schemes to change the look completely. This type of model was inspired by RJ Design, but this is MasterPrinter's own original design.
Print settings
Infill: 0% (there is no overhang that requires infill)
Supports: No
Brim: No
Filament: PLA, PETG, or ABS/ASA should all work fine
Files: Part 1, Part 2, and a combined Both Parts file
Fit tip
In PrusaSlicer, go to Print Settings, then Advanced Settings, and set XY Size Compensation to -0.35 for the inner piece, to help improve print tolerances.
Good to know
If a young child will use it, scale this design much larger than the size of their mouth.
When taking the vortex off the printing plate, make sure the plate is completely cooled off, to avoid warping both vortex parts.
My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.