1 / 2
Honda VTR 1000F - Verkleidung Abstandshalter | fairing spacers — zdjęcie 1
1 / 2

Honda VTR 1000F - Verkleidung Abstandshalter | fairing spacers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simpler Abstandshalter für Seitenverkleidung der Honda VTR1000F | Simple Spacer for side fairing of Honda VTR1000F

Ocena
0 / 5
Polubienia
2
Pobrania
36
Wydruki
0
Wyświetlenia
204
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

To fit the side fairing to the Honda VTR SP1 and SP2, you need a spacer that separates the frame from the fairing. This is the perfect replacement in case the original part gets lost. I've had it on my bike for three years now and haven't had any problems with temperature or durability.

*A slower print speed is essential, as the part experiences heavy loads from vibrations. In speed mode, it broke after the first tour, while in structural mode, with increased printing time per layer, it has lasted three years without any issues.

Please leave a like if you appreciate it. :-)



##################################################################


Um die Seitenverkleidung an der Honda VTR SP1 und SP2 zu montieren, benötigst du ein Distanzstück, das den Rahmen von der Verkleidung trennt. Das ist der perfekte Ersatz, falls das Originalteil mal verloren geht. Ich habe das gedruckte Teil jetzt seit drei Jahren an meinem Bike dran und hatte bisher keine Probleme mit Temperatur oder Haltbarkeit.

*Eine langsamere Druckgeschwindigkeit ist entscheidend, da das Teil durch Vibrationen stark belastet wird; im Speedmode war es nach der ersten Tour gebrochen, während es im strukturellen Modus mit mehr Druckzeit je Schichten seit drei Jahren problemlos hält.

Bitte lasst ein Like da, wenn es euch gefällt. :-)

 

Material:PETG
Infill:20%
Printmode:Structural*

Tagi