Liczymy pasujące modele…
The SD2SP2 POR (Pro?) has a problem - there is a gap between the SD card slot and the GameCube chassis. It's very easy to insert the SD card into the void and you'll have to unscrew the GameBoy Player just to retrieve the card. Print this…
This is a complete redesign of the SD2SP2 cover, which widens the opening to access the Micro-SD card and better supports the SD2SP2 adapter. All dimensions were pulled from the original SP2 cover and optimized for FFF printing. I took…
Since there are not a lot prinatbles for the Sunlu SP2 i've designed a desiccant box for it. The box ist fitting well on the bottom of the dryer. Just insert silica gel larger than 1,5mm in diameter. Just printed it with PETG on standard…
Printing recommendations as per the original model however I chose to go with a 50 percent infill printed in PETG. I've removed a large number of the bonded sections leaving only two parts that need gluing together. These will all fit on…
This thing covers the gap between the SD2SP2 and the console. It avoids accidentally inserting the MicroSD through the hole and it improves the aesthetic appearance of the whole. This is a specific design for my SD2SP2 (Rugal_kof94's…
Ihr benötigt: 2x bzw. 4x M6x15mm -20mm Schrauben und Muttern 1x M4x20mm und Mutter 2x M8 Schrauben + Nutensteine für die Montage am Rig
Magazin loading help Hämmerli 280 or Hämmerli SP20 sport pistols Print with PLA or PETG , no supports needed
Hey Here you can find the new KSP (Kerbal Space Program 2) logo as 3d printed display. So that you can build the whole thing, you need black, white and red filament. I have printed it with PLA. Additionally you need some glue. One big…
This is a remix of the Malahit Radio Stand, by Mic, which was made for the Malahit DSP1 radio. This model has been scaled up to fit the Malahit DSP2 radio. I printed this on my AnkerMake M5, but it should work well for any properly sized…
Over the last few years, the original attachments all broke in the same place, the small tab securing them to the clipper. I was not abel to source any replacement parts online, so modelled a set base on the original. They may fit others…
A few months ago I damaged one of my PCBite SP200 probes. So i had to repair them. When i saw today those protective sleeve i thought lets print one of those. Unfortunately it didn't fit the SP200. So I designed a new one i started from…
I create my own model to store my ESP-2686 McUs, specifically the NodeMcu V3 variant.
High-friction engineering filaments on cardboard spools kept binding in the dryer while printing and failing prints when the extruder couldn't pull hard enough. This is a quick fix, implementing 2x 608 bearings to smooth out the feed…
Abdeckung für den SUNLU SP2 Filamenttrocker- Heizeinheit, um das eindringen von Staub zu unterbinden.
Experimental - Will probably never be updated https://www.reddit.com/r/Gamecube/comments/122ikdn/picoboot_sd_card_mod_install_dol101/ I don't know if the parts will be compatible with other motherboard models than mine The back cover…
Designed exclusively for the SUNLU FilaDryer SP2, this multi-purpose tray expands the dryer's functionality—not only for drying 3D-printed objects but also for handling other small items (e.g., dried flowers, gloves, shoes, and other…
alternate version of Sideloading SD2SP2 Cover for Sideloading SD2SP2 with a slightly different shape I made it from scratch but wanted to give AmyGrrl credit for coming up with the idea, tried to make it printable without supports and it…
I got tired of having to remove my Game Boy Player to get access to the SD card on my SD2SP2 port, so I made this SD card mount. The SD card reader used here is: https://www.adafruit.com/product/254 The board width happens to be just…
Update 11.06.2026: Ich habe zu den Dateien ein Adapter hinzugefügt mit einer Materialstärke von 4mm für Nutzer, die es nicht mit ABS/ASA drucken können aufgrund vom fehlenden Bauraumheizung. Somit kann diese Variante vom Adapter mit z.B.…
Petg. Print without supports .
Breadboard designed to fit Wemos D1 Mini ESP32 and it's derivates. PLA does the job just fine.
I wanted to have a compact case for my DPS5005 Lab Bench Supply powered by a Meanwell RSP-200-48. the halfes can get screwed together, but for stationary use the friction fit is sufficient. It also features litte balls as feet, and…
FilaDryer SP2 Spool Roller A practical accessory designed specifically for the SUNLU FilaDryer SP2! This roller perfectly fits filament spools (<1kg) or paper spools, ensuring smooth rotation during drying to prevent tangling. Recommended…
Clips inside drawer to hold one or three Sig Sauer SP2022 magazines. This is designed for a drawer side-wall of 12 mm. STEP file included, feel free to modify or remix. Could be pretty simply modified within slicer as well. Recommend…
Ferrari Monza SP2 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
A speaker riser / stand that matches the one that comes with the Corsair SP2500. Approximately W-100mm x D-30mm x H-12mm (18mm at the rim). It doesn't exactly match, the original it's missing a slight angle on the way up, but it's close…
Brackets to mount the SMSL SP200 under the desk. It interlocks between the rubber feet so those need to be present. I printed them vertical and didn't need supports.
Fixture for mounting SDRPlay's RSP2 with Multiboard or Underware organization systems.
I recently purchased several of the Sunlu SP2 Dryer Boxes and I absolutely love them. But….having several spools in them with PLA and PETG I would have to pull them off the shelf to see what was what. So, I made these labels that plug…
English: I made a little change to the FlexiStruder by MikeFrancies, published Oct 29, 2015 ( http://www.thingiverse.com/thing:1099016 ). The flexistruder seemed to be the best solution, for printing flexible filaments. I run a similar…
It's a simple no-frills stand for the Malahit DSP2. Receiver fits perfectly, and all controls and buttons are easily accessible. The radio on its own makes its own controls akward to access unless you're holding it on one hand. This stand…
An adapter for cordless delta sanders, for connecting to a vacuum hose. Made specifically for P.I.T. PSP20H-140A, but may fit other ones. Pictures and dimensions are provided if you want to check whether it fits your machine. Wall…
Da ich noch zwei PolyMaker Polydryerboxen hier habe aber keine Heizeinheit, dafür einen SUNLU SP2 Filamentbox mit Heizeinheit, wollte ich dafür einen Adapter haben, damit ich die Polydryerboxen auf den SUNLU Sp2 drauf bekomme. Ich hoffe…
Mit Hilfe von @3DPrinterers https://www.printables.com/@3DPrinterers habe ich noch einen Adapter für die Polymaker Dryerbox Xl für dem Sunlu SP2 erstellt in 4mm Wandstärke. Da die Temperatur des Heizers bei den Maximal eingestellten 70°C…
IEC C14 mounting socket for Meanwell SP series power supplies
The Harmonics SP2 siren is designed for virtually any small speaker to fit! This siren features four horns for an omnidirectional sound output, and this siren is perfect to use during a severe warning. This siren features four ergonomic…
Since there are not a lot prinatbles for the Sunlu SP2 i've designed a desiccant box for it. The box ist fitting well on the bottom of the dryer. Just insert silica gel larger than 1,5mm in diameter. Just printed it with PETG on standard…
IEC C14 mounting socket for Meanwell SP series power supplies
High-friction engineering filaments on cardboard spools kept binding in the dryer while printing and failing prints when the extruder couldn't pull harder enough. This is a quick fix, implementing 2x 608 bearings to smooth out the feed…
It's a simple no-frills stand for the Malahit DSP2. Receiver fits perfectly, and all controls and buttons are easily accessible. The radio on its own makes its own controls akward to access unless you're holding it on one hand. This stand…
This is a replacement case for the SP2 gate remote , designed to perfectly fit the original electronics. You need to keep the original buttons, two screws, and LED indicator for proper assembly. Key Features: Tightly fitted parts – the…
This part is designed to be printed in multimaterial on a toolchanger, such as a Prusa XL, with PLA support, PETG main material, and PEBA or TPU as the rubbery parts. If you do that, you should make sure to enable “beam interlocking" so…
The humidity sensor in the Sunlu SP2 is too close to the silica compartment leading to false readings, so I made this box to put it in the middle of the dryer to increase the acuraxy of the sensor. The magnets are 5x2mm. I didn't make…
I changed the dimensions of this part for the ssp2 based of a comment. So please give me feedback if it fit's.
The stock desiccant holder on the SP2 doesn't fit much gel and is wrapped around the humidity sensor, giving it artificially low readings. This box adds space for ~70-80g of silica gel desiccant in the bottom of a Sunlu SP2 filament…
da ich Zeit und Lust hatte, habe ich einen Schlüsselanhänger von einem VW SP 2 erstellt.
I found getting the cross beam out of the Sunlu SP2 filament dryer challenging. This is effectively just a handle to help remove filament spools from the dryer. The orientation of the model is the assembled configuration. You will have to…
This adapter clamps around the rubberized portion of the handle on your Weller SP25N and provides a 43mm outer diameter to mount it into all Euro-standard drill stands. I designed this to go with the Olsson Heat Insert Tools, which are…
I bought some SP20 connectors off AliExpress, but they don't come with a cover for the male plugs, so I drew one. Print the gasket and connector in TPU.
