CPS SP2 Stock Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjusted the excellent model from Lupo Solitari
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 929
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Printing recommendations as per the original model however I chose to go with a 50 percent infill printed in PETG.
I've removed a large number of the bonded sections leaving only two parts that need gluing together. These will all fit on a 220mm square print bed.
I've included a bolt on rail and a few other aesthetic tweaks.
Thankfully I had an excellent base model to work from. Thanks Lupo Solitari
You will need some additional hardware as well as what is in the original model:
4x M3 x 8mm Button Head Allen Bolts
2x M4 x 16mm Allen Cap Head Screws
2x M4 nuts and washers