CPS SP2 Stock Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjusted the excellent model from Lupo Solitari
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 184
- Makes
- 1
- Views
- 929
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Printing recommendations as per the original model however I chose to go with a 50 percent infill printed in PETG.
I've removed a large number of the bonded sections leaving only two parts that need gluing together. These will all fit on a 220mm square print bed.
I've included a bolt on rail and a few other aesthetic tweaks.
Thankfully I had an excellent base model to work from. Thanks Lupo Solitari
You will need some additional hardware as well as what is in the original model:
4x M3 x 8mm Button Head Allen Bolts
2x M4 x 16mm Allen Cap Head Screws
2x M4 nuts and washers