SD Card Port Cover for SD2SP2 POR/Easy Access Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Something to ensure the SD card going into the right hole.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 891
- Wydruki
- 6
- Wyświetlenia
- 5110
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
The SD2SP2 POR (Pro?) has a problem - there is a gap between the SD card slot and the GameCube chassis. It's very easy to insert the SD card into the void and you'll have to unscrew the GameBoy Player just to retrieve the card.
Print this piece, jam it in there and then install the SD2SP2 Pro, and the problem is dealt with ;-)
-------------------------
Printing
Printing the piece facing down with support worked the best for me.
-------------------------
Installation
As simple as demonstrated in the picture. There's not much room to make a mistake.
-------------------------
Appearance
-------------------------
Variants/Original
I bought the AliExpress POR version as in these photos in order to create this model.
Easy Access Version from Rugal_kof94
The one Rogal_kof94 is selling on eBay HERE.
He has created an official version for his own variant. You can find the mode HERE.
Flush PCB with Indented Card Slot
This one is also different from the rest.
Please download the corresponding STL file.