Sunlu SP2 filament dryer desiccant silica gel box - parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silica gel desiccant holder for the bottom of the Sunlu SP2 filament dryer. Prints without supports and holds 70-80g.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock desiccant holder on the SP2 doesn't fit much gel and is wrapped around the humidity sensor, giving it artificially low readings. This box adds space for ~70-80g of silica gel desiccant in the bottom of a Sunlu SP2 filament dryer, which means you get 4-5x more desiccant, away from the sensor, and more in line with the airflow.
Printed in PETG this should easily cope with the temperatures in the dryer. The default model has maximum bridges of 5mm so should print easily without supports. It requires 12 6x3mm magnets, but if you have some other size available you can tune the size of the magnet holes in the parametric OpenSCAD file.
This is heavily based on the original design by Essah93, but re-created as a parametric model and updated to include magnets in the lid and perforations that are easier to print.
Files Available:
Download the .stl file here on Printables for the default box that fits the SP2 perfectly.
Download the .scad file on GitHub to customise the model and create your own version.