1 / 3
Sunlu SP2 filament dryer desiccant silica gel box - parametric — image 1
1 / 3

Sunlu SP2 filament dryer desiccant silica gel box - parametric

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Silica gel desiccant holder for the bottom of the Sunlu SP2 filament dryer. Prints without supports and holds 70-80g.

Rating
0 / 5
Likes
7
Downloads
79
Makes
0
Views
472
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

The stock desiccant holder on the SP2 doesn't fit much gel and is wrapped around the humidity sensor, giving it artificially low readings. This box adds space for ~70-80g of silica gel desiccant in the bottom of a Sunlu SP2 filament dryer, which means you get 4-5x more desiccant, away from the sensor, and more in line with the airflow.

Printed in PETG this should easily cope with the temperatures in the dryer. The default model has maximum bridges of 5mm so should print easily without supports. It requires 12 6x3mm magnets, but if you have some other size available you can tune the size of the magnet holes in the parametric OpenSCAD file.

This is heavily based on the original design by Essah93, but re-created as a parametric model and updated to include magnets in the lid and perforations that are easier to print.

Files Available:
  • Download the .stl file here on Printables for the default box that fits the SP2 perfectly.

  • Download the .scad file on GitHub to customise the model and create your own version.

Tags