Delta sander elliptical dust port vacuum adapter (PSP20H-140A)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for cordless delta sanders, for connecting to a vacuum hose. Made specifically for P.I.T. PSP20H-140A, but…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
An adapter for cordless delta sanders, for connecting to a vacuum hose. Made specifically for P.I.T. PSP20H-140A, but may fit other ones. Pictures and dimensions are provided if you want to check whether it fits your machine.
Wall thickness is 2mm. Dust port and hose end inner diameters are 0.2mm bigger to account for 3d printing shrinkage
Files:
Dustport - just the elliptical dust port, so you can add it to whatever you want in CAD; uploaded in STL and STEP
Delta adapter for 31 mm OD hose - has a 31.2mm inner diameter for a 31mm OD hose. Seems to be a common size for cheap generic shop-vacs
Delta adapter for 35 mm OD hose - 35.2mm inner diameter for a 35mm OD hose. Common size for power tool dust ports and higher grade shop vacs. Perfectly fits my Karcher WD 2 plus original hose
Printing: whatever material you normally use (PETG in my case), any layer height, no supports needed. Use brim or helper disks for better bed adhesion if needed, as there is minimal contact surface with the bed
Note: my sander had an o-ring on its dust port. This adapter has a tight enough fit to not need it, so i removed it.
Category: Machine Tools