1 / 5
Delta sander elliptical dust port vacuum adapter (PSP20H-140A) — image 1
1 / 5

Delta sander elliptical dust port vacuum adapter (PSP20H-140A)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An adapter for cordless delta sanders, for connecting to a vacuum hose. Made specifically for P.I.T. PSP20H-140A, but…

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
30
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

An adapter for cordless delta sanders, for connecting to a vacuum hose. Made specifically for P.I.T. PSP20H-140A, but may fit other ones. Pictures and dimensions are provided if you want to check whether it fits your machine.

Wall thickness is 2mm. Dust port and hose end inner diameters are 0.2mm bigger to account for 3d printing shrinkage

Files:

Dustport - just the elliptical dust port, so you can add it to whatever you want in CAD; uploaded in STL and STEP

Delta adapter for 31 mm OD hose - has a 31.2mm inner diameter for a 31mm OD hose. Seems to be a common size for cheap generic shop-vacs

Delta adapter for 35 mm OD hose - 35.2mm inner diameter for a 35mm OD hose. Common size for power tool dust ports and higher grade shop vacs. Perfectly fits my Karcher WD 2 plus original hose

Printing: whatever material you normally use (PETG in my case), any layer height, no supports needed. Use brim or helper disks for better bed adhesion if needed, as there is minimal contact surface with the bed

Note: my sander had an o-ring on its dust port. This adapter has a tight enough fit to not need it, so i removed it.

Category: Machine Tools

Tags