Dishwasher Clean / Dirty Sign improvements - Tolerances and New Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dishwasher clean/dirty sign -easier (better?) front cover -10x3mm magnet -improved 6mm tolerances -tweaked slider
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 129
- Wydruki
- 3
- Wyświetlenia
- 637
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Liked the original, thx for the upload Printess … however, after printing had some issues with it so I reworked it for myself and decided I would post here in case it helped others:
- Easier more enveloping fit front cover
- no glue
- stays secure
- improved tolerances for slider
- !! cover should fit the original model if you prefer or already printed that !!
- Added a base with 10x3mm magnet holes
- action more “fidgety”
- will stick better to dishwasher (unless yours is stainless steel like mine, 3m VHB FTW!)
- 2nd base model included with improved 6mm magnet tolerances (larger holes)
- Improved magnet tolerances on slider (uses 6x3mm magnets, again larger)
NB The “Clean” insert piece showing in my image did not print nicely - so I used the originals found here … and scaled them back to 39.9x24.9mm - again, super tight tolerances in originals so just easier to fit yet remain snug at this size
(All printed in PETG - which in my experience tends to shrink more than PLA).