VKB Gladiator NXT Support-Free Hat Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print hat switch for the VKB Gladiator, if you find you need something with more grip or comfort
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 1765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Easy to print hat switch for the VKB Gladiator, if you find you need something with more grip or comfort. The wider surface and the gentler slope with the grippy top helps with games like Star Wars Squadrons, where the hat is used extensively. It's easier to use in general with more surface area and greater leverage.
This hat switch is two parts, the top hat itself, and the stem below, which prints separately. Simply press together, or use a little super glue if desired. I found tolerances to be especially important for fit, but variances in hat switch stem dimensions from the factory may require slight scaling.
You may find that a 0.25 nozzle will yield higher quality results. A 0.4 nozzle is acceptable though.