Tree / support scratcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print & glue plate 1 or just print plate 3, to twist into plate 2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to combine previous competition (tree support art) with current competition (back scratcher).
I couldnt figure how to make the tree supports only go from the thread upwards… the best I could do was have it along side the thread, but the good news is you can either stick it on to the support (more fragile) or remove the bottom layer of the support and stick the thread to the inside of the tree support, then screw that on to the telescopic pole.
Then I thought, there's still no tree back scratchers in the comp, so let's do one with an actual tree someone designed.