Liczymy pasujące modele…
This is a custom universal body/back scratcher designed for "Prusa Flash Contest". Infino Scratch is a multi purpose back and body scratcher (with easy click and release). innovative click and release design for easy extendability to any…
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
Print all parts with a brim. I suggest printing inside pieces near each other so that brims attach together and help keep it from being knocked over. Print at 0.2mm. You will need two of the grommets. Or maybe more. See video to determine…
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
I designed this toy for my children to make reaching distant objects fun. The semi-support structure means joints, jaws, and screw print without supports; only the arms need build plate supports for optimal results.
Extendable Drink Cooler A threaded design that fits cans of most sizes. Engineered for insulation while still being slim and comfortable to use. Show your appreciation for Ukraine, Open Source Hardware, Linux (Tux), or the sun! Plain…
This model is a universal adjustable telescopic wall hook, designed to hold various items by extending and locking its length. The hook consists of sliding parts that allow you to adjust the working length depending on the object you want…
Printed with 3 walls, 8% gyroid, no supports, and outer brim to help with bed adhesion.
My Jorgensen F-Clamps were 0.5mm too wide to fit the original design. I don't know if I have a slightly different model, or some kind of manufacturing change happened, but mine would not sit down in the recess of the original, and the…
I wanted a scalable system to mount my flute collection on the wall. This fits all my bamboo flutes from an F key Xiao (26mm diameter) to a G dizi (17mm diameter). There are three parts I used in my version: a hook piece with a slot for…
You need 1x TT motor and 2x AA 2x battery and some battery tabs. Print 0.2 mm layer no supports PLA. Use 2x M3 nuts AMD bolts to attach motor frame to TT motor. Don't forget to place front axle into the motor frame before screwing the…
Extendable version of Grandars Skadis Gridfinity Bookshelf . As Skadis and Gridfinity use different base distances, there are two versions of the outer and the inner holders. Based on your use case, you need to set them up accordingly. I…
Scintillation Detector Mount that can be attached to a pole, wand or tripod. The mount can accommodate detectors with 1.75" ODs. The mount allow you to rotate the detector and lock it into place with the pivot joint along with the device…
AppleWatch-Band holder for 40/41mm and 44/45mm watchbands with a band width of up to 26mm. No- Support needed - Print in final position with a rim Extenadble by downloading a left piece (,various middle-pieces ) and the right piece. →…
Insert a pause before the top (layer 160), insert the squeegee handle, and keep printing! Works great
Modular organizer for lunch skins. The parts can be plugged together and combined in different shapes. As an alternative, a round piece of wood with 10mm diameter fits as well. With kids going to school in the morning, and each wants to…
This is a custom universal body/back scratcher designed for "Prusa Flash Contest". Infino Scratch is a multi purpose back and body scratcher (with easy click and release). innovative click and release design for easy extendability to any…
This is an extendable phone holder. I would recommend using minimal supports, should be easy to remove, no nooks or crannies. Make sure to CHANGE THE SIZE OF HOLDER BASED ON YOUR PHONE SIZE! Thanks so much!
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
Remix of @cq_15273 "Infinitely Extendable Long Tube Nozzle - Dyson >=V7", adapted the size to fit the Dyson Big Ball.
Hello everyone! This model is my interpretation on the scratcher contest. This model is perfect for your cat, dog, or yourself! It extends to 35 cm/14 inch, it locks itself by a soft pressure-ish lock. I'd print this in a tough PLA to…
Simple storage box, which is easily extendable thanks to some complementary slide ins to the sides. I upload two versions: a squared one and a rectangular one.
Playing card holder / storage box / tray with lid - stackable - extendable. I can adjust the size to any other card size or slot number on request. Currently fits the Catan cards (original edition) with 44x68mm². The lid closes firmly so…
A tiny improvement over jipimac's perfectly adequate version . This one works without the metal spring, I replaced its function with a tiny nook that works just as well to secure it in place when not in use, with the added benefit of a…
This is a socket holder in chain form! Files provided for 1/4", 3/8" and 1/2" drive sockets. To make an open ended socket holder: Print as many "links" as you have sockets - 1. Print 1 "ring" and one "plug" To make a closed loop simply…
Tablet or laptop stand with widths from 9.2 mm to 20.2 mm. Includes a mask for cutting 1mm thick EVA foam, both in the support areas of the laptop or tablet and for the support base. Antistatic tape can also be used for the base of the 3D…
The Oxo kitchen scale includes a handy extendable display for when you are using a large bowl. This is normally held in by magnets, although these magnets are often not strong enough to secure the display if the scale is grabbed from the…
Main body better to print with 100% infill to increase compensation weight. There is also model with wider handle if you like to increase weight even more (in that case print appropriate stand also) Small support for main body nose may be…
Either support or brim are required. PLA is OK. Layer height is 0.2mm.
IKEA CITRONHAJ Spices Stairs These stairs are specifically made for the 20cm wide METOD Kitchen Cupboard with pull-out drawer Put these in the top shelf with 4 Citronhaj or print more of them :) Extendable Low Tolerance (0.2mm gap on…
Print all parts with a brim. I suggest printing inside pieces near each other so that brims attach together and help keep it from being knocked over. Print at 0.2mm. You will need two of the grommets. Or maybe more. See video to determine…
This build is designed to not use glue, so the fits are all very tight. This piece gets used daily in my kitchen. Great for drying out soft running flasks that don't dry easily with traditional drying racks. We don't have baby bottles…
I present to you the Extendable Hanging Shelf project. The project was originally designed to hang on the Ikea BRUKSVARA wardrobe, but you can probably hang it on other wardrobes as well. The assembly is simple. You will need countersunk…
Egouttoir à vaisselle 40cmX40cm extensible jusque 65cm de long avec support de tasses ou bouteilles démontable et grand égouttoir à couverts 40cmX40cm dish drainer, extendable to 65cm long, with removable cup or bottle holder and large…
This is a replacement flexible foot for the curtain rail
Please read entire description before printing. This is the 3rd version of my drain snake that I designed. This version is a modular extendable version, allowing you to conenct as many pieces together as you want, making the snake as long…
TSX05 : Extendable Side Table Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Has tiles for hardware M4x25 (recommended when using extensions) You will…
An extendable slide holder part from a Canon Inkjet printer model PIXMA 2522.
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Collapsible, Extendable, Retractable Baton. It is a good toy and a cosplay option. The head at the handle is screwed. The material I used is PLA/PETG Basic…
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
🇬🇧 English Version Modular Meßmer Cold Tea Rack – Stackable & Easy Access This custom-designed rack is perfect for organizing your Meßmer Cold Tea boxes in a stylish and space-efficient way. The modular system starts with a sturdy base…
This is an easy to print fan for the summer, because let's be real. Who likes to sweat in the summer heat. I would recommend printing this with a high infill percentage of 90%-100% since the fanblades are not very thick and it would make…
I suggest 0.5 layer height as no glue or screws needed the layers just snap together. The sliders do not need support when printing. Layer order is: 1 - Cup holder Base 2 - Connector & 1 Slider 3 - Layer 1 & 1 Slider 4 - Layer 2 & 1…
I designed this toy for my children to make reaching distant objects fun. The semi-support structure means joints, jaws, and screw print without supports; only the arms need build plate supports for optimal results.
Extendable shelf system I needed a table shelf so I created an extendable shelf system 😊 For 20 mm wood boards of any legth and width (tested with 400 mm width) Two sizes - 120 mm / 170 mm shelf spacing for 200 mm / 250 mm brint beds…
Re-upload of model https://www.thingiverse.com/thing:6791127 Modular shoe rack infinitely extendable by wanderlust03 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license. Original Description by…
I got a Keter workbench. Because I work in an environment where it is often difficult to find a level base, I came up with height-adjustable legs for the table. I printed the outer part from ABS, the inner part from PLA. For the final…
Extendable Drink Cooler A threaded design that fits cans of most sizes. Engineered for insulation while still being slim and comfortable to use. Show your appreciation for Ukraine, Open Source Hardware, Linux (Tux), or the sun! Plain…
Simple plunger part of syringe for Flux. It has extandable body for confort length of plunger which depends on actual amount of leftover flux in syringe. For syringe with 23 mm diameter hole.
My version of an extendable and sliding lid and pan holder. It's my first project, but I've tested it and it works like a charm. The base ranges from 15 cm to 30 cm, but by repeating the “main base” and “extension” you can extend it as…
I don't charge for this model. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Middle finger keyring wasn't enough? How about a giant…
The last vinyl holder piece is used as a support! Made to be sturdy Added female & male ends to hide the connections. The connections should be tight. As long as the pieces are connected they can also be shifted to be able to view the…
Wanted to make one of those extendable pointing fingers going around, but couldn't find a proper one. So I decided to make it on my own, it extends up to 60 cms and is quite sturdy when done so. Simple to assemble, print each part, slide…
This model is a universal adjustable telescopic wall hook, designed to hold various items by extending and locking its length. The hook consists of sliding parts that allow you to adjust the working length depending on the object you want…
Printed with 3 walls, 8% gyroid, no supports, and outer brim to help with bed adhesion.
Easily change out the Finger if you like or already printed the version with the index finger.
My Jorgensen F-Clamps were 0.5mm too wide to fit the original design. I don't know if I have a slightly different model, or some kind of manufacturing change happened, but mine would not sit down in the recess of the original, and the…
Quickly created in Tinkercad. I printed in PLA with a layer height of 0.28mm, 20% infill, speed set to 100mm/s and it took about 20 minutes total.
First go here and print the Extendable Protest Sign Handle (I am not duplicating their work here), then print the crossbars that fit your needs. Sign top no prop: fits on the top of the rod. It has some holes for a zip tie but it's a…
I made a fully extendable spool holder. by using an interlocking design. You can extend as long as you want. I used 3 walls, 15% infill, 3 bottoms and tops I used PETG for this but you can use PLA use 608 bearing, the bearing shaft is…
Prints on 220 x 220 cm bed by repositioning
I wanted a scalable system to mount my flute collection on the wall. This fits all my bamboo flutes from an F key Xiao (26mm diameter) to a G dizi (17mm diameter). There are three parts I used in my version: a hook piece with a slot for…
You need 1x TT motor and 2x AA 2x battery and some battery tabs. Print 0.2 mm layer no supports PLA. Use 2x M3 nuts AMD bolts to attach motor frame to TT motor. Don't forget to place front axle into the motor frame before screwing the…
This model is free for personal use! Want to sell prints or get the commercial license? Join my Patreon and get exclusive commercial rights! https://www.patreon.com/triformdesigns A fully collapsing sushi sword STL that extends smoothly…
a remix of the popular fidget star toy, adding a star shaped handle which makes it excellent for spinning,
Extendable version of Grandars Skadis Gridfinity Bookshelf . As Skadis and Gridfinity use different base distances, there are two versions of the outer and the inner holders. Based on your use case, you need to set them up accordingly. I…
Scintillation Detector Mount that can be attached to a pole, wand or tripod. The mount can accommodate detectors with 1.75" ODs. The mount allow you to rotate the detector and lock it into place with the pivot joint along with the device…
A simple hook for a friction-fit rod. Could work as a shower curtain hook too. Inner diamater of the hole is 25mm.
The pleasure of reinventing the wheel.... Push your spool or bull or thread onto the pin and it will merrily roll along as you're using it. You can disassemble and it will snap in place for travel. You need a 608 bearing. There is is all…
A modular shoe holder for a closet. Print multiple and use like a hanging vine holder!
If you are like me and have tried to optimise your wood usage when building tool holders, then you might find that the common French cleat locks do not work for you. I have designed this lock so that it can be extended past a tool holder…
Collapsible extendable "Dick Baton" Let me introduce you to the sword with a retractable "penis," designed to look like a baton, but with a playful twist. It’s fun and lighthearted—perfect for joking around with your friends, for…
Collapsible and extendable Pussy Baton Let me introduce you to the sword with a retractable "pussy," designed to look like a baton, but with a playful twist. It’s fun and lighthearted—perfect for joking around with your friends, for…
Extendable Snap-fit Holder for Alsado Keychain Screwdrivers Extendable Snap-fit Holder for Alsado Keychain Screwdrivers, that can be chained to hold many screwdrivers. Key Features Compatible with Alsado Keychain Screwdrivers (…
Tired of damp, crowded towels that never dry? Standard bathroom heated towel rails often have pipes placed too close together. This means towels overlap, trap moisture, and take forever to dry. This Extendable Towel Rail Dryer Arm is a…
Our "adorable" dog chewed up the clip which holds our clothes airer together when it's folded up. This is a very simple replacement. The clip jaws suit 8 mm diameter bars and the clip centres are 115 mm apart. I printed this in PETG for a…
didn't think the mounting tab looked strong, so made some holes. Category: Organization
This is a simple, minimalist garden stake that won't take a lot of time or filament to print. Any size you choose repeats easily, so you can reprint as your plants grow: simply reprint that size as needed and slot the peg into the end of…
Handle length is 200mm and you can extend it up to 340mm. I printed flap with TPU filament and other parts with PLA. I printed rod and locking nut 0.16mm layer height and other parts with 0.2mm. I made threads 10mm long for more strength.…
Born of frustration that I had too many spice jars, it's hard to see what's in the cupboard unless I dig and they're never all the same size, this spice storage solves all the issues I was having. Sizes - the inserts allow smaller jars to…
"Size matters!!!" large box with deep cells, the dimensions are designed for the maximum printing capabilities of Ender 3, it is convenient to use for small tools or spare parts Print Settings Printer Brand: Creality Printer: Ender 3…
Remix of Thingiverse user Tedoyan's "Cap Rack (Extendable with Dovetail joints)" thing:4897564. Tedoyan's design to hold the caps in place worked great however the dovetail joints would work loose over time causing my hats to fall out on…
this is a handheld container that allows you to hide things in plane sight while still being able to add a low quality addition to any collection
Go Pro Extendable Holder Need 2x M5 screws and nuts. Build Video: https://youtu.be/D38hHAHIG-0 Category: Camera
A model of the clear and white parts from a disposable extendable straw attached to every Kirkland brand boxed milk carton. Models are meant to be remixed to help with upcycling projects, and are not intended to be printed in fused…
This sleek and durable Nespresso Original Pod Holder is capable of displaying over 50+ pods with as small as a footprint as possible! With no sacrifice to convenience, the pods easily slide out from the top keeping you caffeinated all…
Allows you to convert the IKEA RANARP clip lamp into an extendable one.
With this part you can repair your suitcase if the push button doesn't work as spected. You can see the printed part in orange color in my own suitcase. Enjoy!
I have created a very simple extendable rod that can screw into itself. Print multiple for length. Print with 100% infill for rigidity. Size as you see fit. Done it because I have been looking for one and couldn't find it in the right…
In an effort to make myself and my wife as comfortable as possible on long trips, I designed and printed these clips that cling onto the sun visor and allow a 100mm (3.9") x 300mm (12") piece of 1.5mm (1/16") material ( hard plastic,…
I really liked the original design, but I wanted something longer so I made this little connecting piece. Basically, I brought it into Fusion 360, fliped a model over, aligned them, then I cut it, joined and this is how I got here. It's…
It is not an ordinary ruler... it is a whole new measurement method... Situated between a folding ruler and a tape measure, this handy measuring tool combines the best of both worlds. Extensible, yet rigid due to the sliding action. And…
The original design (https://www.thingiverse.com/thing:5322891/) has the arms tilting up, I rotated the clip part down 10 degrees so the support arm is parallel to the cricut's platform. Extendable Design allows better support for a 24…
