Extendable Accessory Storage for Ikea Kallax + Extension [UPDATED]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE 1: Added a borehole to the Watchhalter to remove the watch charger easier!
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 1172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
UPDATE 1: Added a borehole to the Watchhalter to remove the watch charger easier!
UPDATE 2: Add of another three key holders. Further extensions through gap in the bottom possible
This is a simple Accessoire Storage for your IKEA Kallax rack. You can extend it through the gap on the bottom. In this package i added an Apple Watch charging dock, which you can mount through this gap. The screws I used were remaining after assembling the rack. It fits perfectly to the given boreholes of the rack.
I recommend following layer heights:
Storage - 0.35mm
This resolution is enough even for the boreholes and saves time.
Sicherungsstift - 0.05-0.1mm
It is has to be precise but not every printer is able to print that detailed. For that just try the smallest layer height you can print. It will fit even then.
Apple Watch Charging Dock - 0.2mm
That is a good compromise of print time and quality. It fits very well.
For native files feel free to contact me!
Happy Printing!