3D-Printed Extendable Sun Visor Shade Clips for Porsche (718 Cayman / Boxster)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are clips that attach to the stock visor that give you an extended blade for those who sit all the way back.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1968
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
In an effort to make myself and my wife as comfortable as possible on long trips, I designed and printed these clips that cling onto the sun visor and allow a 100mm (3.9") x 300mm (12") piece of 1.5mm (1/16") material (hard plastic, balsa wood, carbon fiber, cardboard, etc.) to be extended to block the sun from the side windows. I have included a DXF file for cutting!
You will want to print these from a higher temp filament like ABS, Nylon, etc. As even PETG softened in the 50+C 130+F of a cars interior in the summer.
Designed for a 718 Cayman, these probably work with other Porsche models.
I have two STL versions available (comes in a printable pair; drivers / passenger side):
Porsche Visor Clip STL - this is the final version that will still allow the vanity mirrors to be opened if you slide the panel all the way over.
Porsche Visor Clip Remixable STL - this is a simpler 20mm version that is just the extrusion. It would block the mirror, but would allow you to remix the design easier.
visor_blade DXF: I had to notch them in order to fit the middle visor clips when closed. I could have also shortened them to about 11", but this worked out. Added a little gaffers tape for grip.
Enjoy!