1 / 1
Wurkkos TS10 or Convoy T3 Extendable Wand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your TS10 or T3 into a lightsaber!
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 1047
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (24)Powiązane
I print these out of PETG but you can probably print these out of PLA as well.
I use the .3mf file and print the parts concentrically.
Design works with the Wurkkos TS10 and Convoy T3