Liczymy pasujące modele…
Styled after the Thyrm Switchback line of flashlight accessories, this 3-piece print goes together to give your Convoy S6 a functional pocket clip as well as a finger ring for a secure hold in tactical (or tacticool) situations! Assembly…
Remix of this ( https://www.thingiverse.com/thing:2957181 ) Diffuser for Convoy S series (high resolution version), so it can fit on my Convoy S21A. I recommend reading Summary of the original project. I don't think it's needed, but I…
Deutsche Version weiter unten: I thought it might be interesting for others to see what I have been working on as a small side project: I live in the northern hemisphere and I do some road cycling. Unfortunately, during spring and autumn…
Convoy H2 Flashlight Diffuser (3D Printable Model) Turn your Convoy H2 from a spot light into a soft ambient light source! This 3D model is designed to create a universal "hat" diffuser for the Convoy H2 flashlight in a "corner" format.…
Install around the brass post of the Convoy 20A driver found on the M21B LHP73B flashlights. In theory it will reduce the amount of damage to the battery if the light lands head first. This design is found on some other tactical style…
Convoy H2 Flashlight Diffuser (3D Printable Model) Turn your Convoy H2 from a spot light into a soft ambient light source! This 3D model is designed to create a universal "hat" diffuser for the Convoy H2 flashlight in a "corner" format.…
Deutsche Version weiter unten: I thought it might be interesting for others to see what I have been working on as a small side project: I live in the northern hemisphere and I do some road cycling. Unfortunately, during spring and autumn…
Tool used to unscrew the newer Convoy H1 bezel with the 4 indents. This isn't for the smooth bezel. Printed in PLA , works fine.
I designed the lens cap to protect the Z1's lens from scratches and dirt during transport or storage. The design incorporates the Z1's bezel pattern, the "Z1" inscription on the front, and some sort of reinforcement on the inside to…
I wanted to be able to turn my Convoy S2 flashlight on very quickly without moving my hand from the handlebar. So I design this flashlight mount that places it underneath the handlebar close to the thumb. It consists of two parts that are…
Its an easy to print adapter for your convoy S2+ or every similar lamp with approx. 24mm. The diffussor seperates the light to the side, so you can use it as a light on a table. When you print 2 of them, the lamp stands stable. When you…
Double holder for two convoy flashlights for the OG-EVKIN CM-02 bike mount. To lock the mount I used a bike mount for a garmin watch Pause to put the nut on the layers: 1: 81 layer 2: 136 layer Screw ISO 7380 : 4 x nut M3 2 x M3 16mm 2 x…
Flashlight holder for MTB bars. For lighting up the dark when riding trails and mountain biking. BOM: Convoy S2+ flashlight 4x M3x20 screws 2x M3 nuts
Convoy S2+ is an excellent, simple, and reliable flashlight, and I’ve expanded its functionality. Existing solutions don’t meet my needs during camping and hiking because the diffuser always has to be carried separately, and it's a…
In what could be one of our deepest lore cuts. here's something inspired from the Legends pack in comics - a popsicle addon set for Purple Wicked Convoy (aka Shattered Glass Optimus Prime)! When charging in with the Primus Vanguard, he…
This mount sits perfectly on the upside down mounts, helmet mounts, etc.. Print with PETG or PC Blend
This fits Convoy S6 pretty well. It might fit other similar flashlights but I haven't tested. It's designed as two parts so both can be printed at the correct orientation for better strength. Instructrions: Print using PETG or ABS for…
I have my Creality K1C on top of a Yukon 48" Tool chest. I am constantly using my flashlight while my printer is actively working so I wanted a way to mount my Convoy T4 flashlight in a fixed place so I can easily grab it whenever I need…
Fixed the hinge and removed writing on top cover
M-lok clamp for convoy s2 or any other flashlight with at outer diameter of 24mm. The clamp uses 2 M3x10 screws and 2 M3 nuts. The pressure switch is also from convoy and fits in with a smal bit of dubble sided tape or some glue. Can be…
In Convoy 4x18 flashlight - glass lens is held by ring - which it is hard to unscrew by hand. Here I made some tool for help :) Print from any hard material (if you don't use it in +45'C environment - PLA should be ok) with 3 walls, and…
This is a handle for the Convoy 3x21D flashlight that allows single-handed operation and prevents conduction of heat from the flashlight body to the users hand. I strongly recommend using a heat-resistant filament. I used Overture ASA;…
Designed my own headband to use H1 as headlight. Suitable for band width 25mm, I use one from Petzl Aria. BOM: 4x Heat insert m2x3x3.2 4x Flat head screw m2x6 Changelog:
3030, 3535, 4040, 5050 Gasket Kits for Convoy flashlights with a 9mm reflector hole. From the left, the first centre piece suits 0.9 & 1.0mm outer pieces, the second centre piece fits 1.0 - 1.5mm outer pieces. From the left: 0.9mm, 1.0mm,…
This is a compartment that can be attached to the headboard (square tube 32mm) of a camping bed. I printed it in two parts. Clip in black PLA and compartment in glow in the dark PLA and glued it together with cyanoacrylate glue…
The bottom hole for the SBT90.2 is 10x11mm, so make sure you place it correctly. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour…
The bottom hole for the SBT90.2 is 10x11mm, so make sure you place it correctly. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour…
My mounting for Convoy S2+. It's tested and it works very well (more than 1000 km made without issue) It is compatible with Vision NS SMR STEM (maybe other stems also idk). If you got other stem you need to adjust…
Whistle Adapted from https://www.thingiverse.com/thing:77183. Banned from using your horn at a truck rally? How about a loud annoying whistle… Maybe not, but show your support and enjoy the times.
A grip ring for the Convoy T6 and the updated version of the T3. I printed mine with Overture black TPU. It's a little difficult to install. I used a plastic pry bar to lever it over the lip on the end of the battery tube.
This is a simple clip-on deflector cap for the Convoy H3 flashlight, designed specifically for bicycle use on public roads. It limits the upper portion of the beam, preventing glare to oncoming traffic and pedestrians - just like a proper…
This case will hold your S2+ flashlight with the pocket clip attached (either on the bottom ring on the tailcap or the ring between body and tailcap will work). You will need 3x M3x20mm screws. I recommend printing the box, lid and latch…
This case will hold your S2+ flashlight without the pocket clip to save space for the people that don't use one. You will need 3x M3x20mm screws. edit 15/08/2025: modified the lid as not to interfere with the flashlight as much while…
This case will hold your S21e flashlight without the pocket clip to save space for the people that don't use one. There is enough space to store the flashlight with the tailcap ¼ turn loosened to protect the battery. You will need 3x…
This case will hold your S21e flashlight without the pocket clip to save space for the people that don't use one. There is enough space to store the flashlight with the tailcap ¼ turn loosened to protect the battery. You will need 6x…
You will need 3x M3x20mm screws. The TPU seal is optional. There is enough play to allow for storing the flashlight with the tailcap ¼ turn unscrewed. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours,…
Simple box design for your Convoy S6 or S7, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch. You will need 3x M3x20 Screws. The tolerances are pretty…
Simple box design for your Convoy S21G, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch. You will need 3x M3x20 Screws. I recommend printing the box,…
Spacers should be printed in ASA or better for higher heat resistance.
The stock gasket is 0.3mm too small, making it almost impossible to centre the LED. This gasket centres the SFT25R perfectly. Recommend white PETG or ASA filament.
https://www.reddit.com/r/flashlight/comments/1nbjtfp/c8_sft25r_beans_modded_with_a_fresnel/
Install around the brass post of the Convoy 20A driver found on the M21B LHP73B flashlights. In theory it will reduce the amount of damage to the battery if the light lands head first. This design is found on some other tactical style…
What Is It? This is a modular lampshade which can fit on more than 21 different flashlight models. There are 5 different lampshade variations: one plain shade, and four shades with raised lettering on the inside, so that when illuminated…
7070, 5050, 4040, 3535, 3030 Footprint. Height 0.6mm - 1.0mm. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour filament. 0.08 - 0.1mm…
This gasket design makes it easy to center 5050 emitters in Convoy T2/T3 hosts. I recommend printing in white ABS or ASA.
With our new Age of the Primes Big Convoy having arrived, it's time to tweak the earlier Matrix Buster to fit his new iteration! This behemoth blaster mainly sits over Big Convoy's entire left arm, and is held firmly with the handle in…
Keep your Convoy H2 flashlight and spare power organized with this rugged, 3D-printable storage box. Designed specifically for the Convoy H2 (and similar sized flashlights), this case provides a perfect snug fit for your light, plus…
Tool used to unscrew the newer Convoy H1 bezel with the 4 indents. This isn't for the smooth bezel. Printed in PLA , works fine.
I designed the lens cap to protect the Z1's lens from scratches and dirt during transport or storage. The design incorporates the Z1's bezel pattern, the "Z1" inscription on the front, and some sort of reinforcement on the inside to…
Prints as two parts for maximum strength. Curved surface isn't perfectly smooth but the strap should be touching your skin rather than the print. The two parts get be glued together at the middle dingus, I used superglue because its easy…
5x6 (passend für 256mm³ Druckbetten) oder 6x6 (braucht 267mm breites Druckbett) Halter für diese kleinen Convoy-Behälter die sich, wenn man gerne bestellt, anhäufen. Löcher für 3,5mm Schrauben mit max. 7mm Senkkopf
I made a ring that can be printed from glow in the dark (GITD) filament and mounted inside the head of a Convoy M21K. For me it fits really snugly, might need to use tape if it's easily falling out. Make sure to print using the wall order…
This is a clip for flashlight convoy s2+. It mounts between back cover and main mody. I think there are ways to improve the strength of the part. But now it works not bad :) ! Use new version (it have correct ring hight) Printing info:…
Simple box design for your Convoy M21K, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery/mechanically lock out the light. You will need 3x M3x35 Screws. I recommend printing the box, lid and…
Simple box design for your Convoy T6, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch. You will need 3x M3x20 Screws. I recommend printing the box,…
A remix to allow the use of the alternative pocket clip. A simple box design for your Convoy T6. This design allows the use of the standard and alternative pocket clips offered by Convoy. There is enough play to store the light with the…
This is a tool to remove the bezel on the Convoy M21H. Printed using an Ender 3 V2 Neo with a stock 0.2mm nozzle @ 20% infill in PLA. Source files can be found here if you want to make adjustments:…
The original cap was for a Convoy S2+ with a 24mm outer diameter, I have scaled it for a Convoy S21A with a 26,5mm outer diameter. I love this cap, I not only use it nearly every day on my Road and MTB rides, but it is also the best from…
A mount for the convoy S2+, S2 or any other 24 mm flashlight / cylindrical object to attach to a gopro style mount. Run a strip of velcro or a zip tie through the opening and wrap around the flashlight to secure. With this remix the mount…
I designed this carrot-shaped case for my son's flashlight. It will fit a Convoy T3, a flashlight with a great led and that can run with an AA battery (safer than li-ion).
This is a shade that slots on to a BLF A6 to allow it to be used as a bike light without blinding oncoming cars. There's a cutout in the rear edge to allow it to be used with a short tube without the clip getting in the way. Category:…
Wall mounts for various Convoy flashlight styles. Needed some way to organize the excessive amounts of these lights I have. L21A version also holds L21B (though not perfectly snug) and fits C8+ surprisingly well. I print them all…
Storage for 3 flashlights in a 1x2 size
This is a 3D printed pistol grip with a trigger switch that fits ~1" diameter flashlights made by Convoy (L21B, M21B, C8+, S16, ETC). It uses the Convoy remote switch ( for L21B , for M21B , for DIY in almost any Convoy light with a…
You can buy this diffuser from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of the light…
A clip for the Convoy S2+ torch. I use this stuck to the dog's flexi lead with double-sided foam tape.
You can buy these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of the light…
made a holder for Convoy S2+ flashlight and as a bonus the Wurkkos FC12 fits too! (the hole is 24mm +/- due to machine tolerance )
I have a Convoy C8+ with the orange Led. It's a neat light with the orange Led. It's really a thrower so I thought it would be nice to have something to diffuse the light to use as a lantern or a safety warning device. At 100% it's very…
Modélisation 3D des roulements convoyeurs BESTOMZ commandés sur Amazon( https://www.amazon.fr/gp/product/B07KSNJZSZ/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=leboisracing-21&linkId=363ad2faf89af9f3e62116f870b73d38&language=fr_FR )…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
Introduction. This has been initialy developped in order to have Gridfinity boxes for a few of my flashlights, (CONVOY, OLIGHT, …) but in the end it's of course working for any kind of rounded item ( glue sticks , flasks , bottles , any…
Can be used to loosen/tighten the bezel of a Convoy S21D flashlight
Modification for Convoy S2 flashlight. Just a little periscope 90 degrees. Requires mirror-like piece, even aluminium foil, and clear plastic (i cut it of cd case) and a zip-tie Works even as headlamp with cheap chinese mount
I print these out of PETG but you can probably print these out of PLA as well. I use the .3mf file and print the parts concentrically. Design works with the Wurkkos TS10 and Convoy T3 Consider supporting us on Patreon!
Please note the flashlight holder has small tab at the end. The flashlight has something that looks like a radiator at the collar. That's where the tab goes. You'll need to slightly bend the ring to make it fit in, but afterwards it's…
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5 Few things that you need to know befor start printing: there are 2 types of diameter of…
i wanted to make a jerry can keychain for the freedom convoy will have to print support for the nozzle but the rest is fine Print Settings Printer: Anycubic Rafts: No Supports: Yes Resolution: 1.3mm Infill: 25% Filament: garbage pla red…
I use this as a hood ornament on my VW Up! Made holes in the eyes for a little piece of filament 3 STL's with different angled bases Printed in PETG Needs support Buy me a coffee
This is a stand for Convoy S2+ flashlight to be used with a diffuser. Useful in cases where you need to place the light source on a horizontal surface like a candle. A notch for the lanyard knot is available so that you do not need to…
You can purchase this item from me here! Consider supporting us on Patreon! This conical diffuser fits snugly onto your flashlights! It's great for lighting up tight spaces or for lighting up a tent while camping. Give it a print! Check…
Simple tool holders for: Convoy S2+ flashlight Plato pliers Tweezers OLFA T-45 scraper You need one T-nut, one M4 screw for each (I used DIN 7984 (low head), but You can use DIN912 as well).
You can buy these from me here! Consider giving us a 1 time donation if you like this model! I have uploaded the raw .STL files, and I have also uploaded my .3mf files. The raw .STL files do not have the holes for the light made in them,…
Hi, its my bike light holder. handlebar 30-35mm light 21-25mm you need: 1x screw M3x40 1x screw M5x15 1x screw M3x16 1x nut M5 2x nut M3
Printed on a 0.4mm printer, 6 perimeters. 65mm/s on my Ender 3 v2 but should be fine at higher speeds I used PLA+ but PETG should work even better. Not compatible with clip, remove it before use. Tried to incorporate but didn't work well…
The cap on the flashlight cuts off the light so you won’t dazzle with strong light. It does not reduce the flashlight’s range, but only cuts off the upper half of the light beam. On the attached photos, you can see how it works. The first…
