Halloween Diffusers for Emisar D4V2, D4K, Wurkkos TS10, Convoy T3, Skilhunt M150 Flashlights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pumpkin, Ghost, and Cauldron! Get ready for the spookiest night of the year with these festive flashlight diffusers!
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 134
- Wydruki
- 1
- Wyświetlenia
- 1064
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can buy these from me here!
Consider giving us a 1 time donation if you like this model!
I have uploaded the raw .STL files, and I have also uploaded my .3mf files.
The raw .STL files do not have the holes for the light made in them, but the .3mf files do have the holes and proper infill defined in them. Please open the .3mf files as a project in PrusaSlicer!
These models are printed at 0.15mm layer height using PETG from California Filament.
The ghost and pumpkin need support material in the bottom hole. The cauldron can print without supports.
I print the stem of the pumpkin, eyes of the ghost, and bubbling green liquid of the cauldron separately from their main bodies. I then use super glue to hold everything together.
I have not had any issues with melting even when the light is on turbo.