Wyniki wyszukiwania: headlamp

Hardhat Headlamp Clip

I needed a way to keep my headlamp from sliding off my hardhat.

Flashlight Diffuser for Armytek Wizard C2 Pro Headlamp

This 3D printed diffuser is designed to fit the Armytek Wizard C2 Pro headlamp and is perfect for camping or other outdoor activities. It attaches easily to the headlamp by simply clicking it on, and provides a soft, diffuse light that is…

Headlamp right-angle lamp headstrap quickrelease mount

A lot of currently available headlamps share the same type of mounting on the headstraps. The mount consists of a couple rubbery rings that have to slip over the body of the lamp. This is ok for a one time task, but if you want to use the…

Faceshield with headlamp adapter

With this Faceshield you can mount a Headlamp (Decathlon type with connection sphere 6mm model evanic) In order to have a good assembly without wasting so much print time the GCODE should have 2 different layers, first 0,3mm and on the…

Headlamp Clips

to keep the headlamp in place on your helmet.

HB04 remix of Headlamp Base Replacement

Printed in PLA+ no problems

Replacement headlamp mount

Model of the mount for the Solight WN32 front LED headlamp. Reinforced thickness. I recommend printing with the support side facing the heated bed. After printing, it's necessary to sand off the remaining supports. In my case, PETG and/or…

Makita DML800 18V LXT Lithium-Ion Cordless LED Headlamp Hanger Wall Mount Holder Easy Print

Makita DML800 18V LXT Lithium-Ion Cordless LED Headlamp hanger, wall mounted holder, labelled with DML800. Two versions, horizontal and vertical. Attach with two number six screws. Print as pictured. No supports needed. Battery Holder…

Customizable Flashlight to Headlamp Adapter

Flat Design Printed flat for strength and compactness Can be bent into a curved shape by first soaking it in hot to boiling water (temperature depends on the filament) If using TPU or a flexible filament, use the no cutout version…

NEBO Illumatrace Blood Tracker Headlamp Cover

Headlamp Hanger 26mm Strap Coast

Headlamp hanger for units with head strap width of 26mm or under. Sized for attaching with two small command strips or two screws 40mm apart. Pictured in use with Coast headlamps. Print as pictured. No supports needed.

Headlamp Clips

to keep the headlamp in place on your helmet.

Headlamp gridfinity box

For two headlamps with straps. Keep it neat. Uses the least possible filament. 0% infill, no supports

Black Diamond Spot headlamp hinge replacement

Replacement for the hinge part on the back of the black diamond Spot headlamp as mine broke. Print in PETG with 100% infill.

Helmet holder for Fenix HM55R headlamp

Two versions: Mainly designed for Decathlon Rockrider Race helmet. 1) Rounded bottom: intended for Decathlon Race helmet 2) Flat bottom: customize to your helmet radius/shape Printed on side with tree supports with PETG. Working fine for…

GoPro adapter for Ledlenser Headlamps

I've made this to mount a Ledlenser HF6R headlamp on a RockRider Expl 500 bicycle helmet by Decathlon. The model is split into two parts to make printing easier and to be able to use two different layer alignment for improved part…

Klein Hardhat Headlamp Band Clip

Printed with PETG for durability, though PLA should work as well. Prints on the thin edge, I used 4 perimeters which negates the need for infill. Will require supports, be very careful when removing supports as the tabs can break.…

Sofirn H25S headlamp mount

Replacement mount similar to original one. Use supports.

Skilhunt HB3 Headband Mount for Zebralight H53 Headlamp

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H53 or H503 mount snaps right into the Skilhunt HB3 headband! Works with H53 and H503 series headlamps. There's is a conformal design…

Sofirn HS10 Headlamp Mount for Skilhunt HB3 Headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Sofirn HS10 mount snaps right into the Skilhunt HB3 headband! Works with Sofirn HS10 series headlamp. The width of the mount is made to fit between…

Wurkkos HD10 Headlamp Mount for Skilhunt HB3 Headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Wurkkos HD10 mount snaps right into the Skilhunt HB3 headband! Works with Wurkkos HD10 series headlamp. The width of the mount is made to fit…

Skilhunt H150 Headlamp Mount for Skilhunt HB3 Headband

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Skilhunt H150 mount snaps right into the Skilhunt HB3 headband! Works with Skilhunt H150 series headlamp. The width of the mount is made to fit…

Universal Tent Headlamp Hook/Holder

Thank you to tuxbobble for the first make on this model! If you print this, please post a make, leave a like, and comment. I would love to see someone else print this, and, get some feedback maybe. This Universal Headlamp Hook eliminates…

Foldable Headlamp Hook for tents with a light diffuser (to use as a lantern)

This model allows you to hang your headlamp as a lantern for your tent! It features a 4 part assembly, completely foldable to allow for the most compact and durable package to throw in your backpack. Fits all standard headlamp sizes. How…

3xAAA battery holder for headlamp

This is a compact design for 3 AAA Batteries. I use it for the replacement batteries of my headlamp. Just throw it in your backpack and forget about it until you need it. The design is greatly inspired by this great battery case from…

Camera Mountable Bracket for Headlamp

This bracket is designed for the “Jexree” LED headlamp, found on Amazon. I designed this as a cheap static light for macro photography. With the extreme brightness these cheap LED lights are capable of, it also makes an interesting POV…

CR18650 Headlamp remix

Remixed model - mirrored to have 4 side Molle atachment and extra holes

CR18650 Headlamp remix

CR18650 Headlamp remix - second version.

Duracell Headlamp Backplate

Reupload of https://www.thingiverse.com/thing:4681860 made by j_conlan1970 @j_conlan1970, if you ever upload this on printables, let me know and I'll remove this upload.

Lexus headlamp dustcover

Lexus headlamp dustcover FOR LEXUS LX300. LX450, LX470, LX570, LX600 (CHECK ONLY ON LX470) WITHOUT HOLES FOR WIRES Пылезащитная крышка для фар Lexus. БЕЗ ОТВЕРСТИЙ ПОД ПРОВОДА REMIXES ARE WELCOME!

Kia Rio 3 Headlamp Dust Cap

a headlamp dust cap for kia rio 3

Headlamp Hack @ MKE Gadgets #173

Headlamp Hack @ MKE Gadgets #173 This hack will keep your battery’s from get corroded. By not sitting in your head lamp. The battery will be attached to the headband, so there no chance of missing places them. Link to YouTube video You…

Decathlon Evadict Ontrail 900 Headlamp battery holder replacement

Relacement part for the Decathlon Evadict Ontrail 900 Headlamp. 3D model of the rear part acting as a battery holder.

Petzl headlamp mount replacement

replacement to use any simple headband for your petzl light

HB04 remix of Headlamp Base Replacement

Printed in PLA+ no problems

Sofirn Headlamp Bracket(modular)

This 3D model provides a replacement mount for the Sofirn HA05 headlamp with a modular design. The modular system allows the individual holders to be printed separately and easily replaced if one breaks. Key Features: Modular Design: The…

Headlamp Helmet Clip

Secures the headlamp to the helmet

Nitecore HC30 Headlamp Diffuser

printed with transparent ABS-T

Headlamp Gopro mount adapter

Adapter for Costco Infinity X1 Headlamp so you can mount your headlamp to a GoPro mount on helmets mount is reversible requires 2 M2.5 plastic screws or similar for assembly

Milwaukee Hard Hat Headlamp to Work Light

PLEASE SEE IMPORTANT NOTES IN THE “REQUIRED HARDWARE” SECTION BEFORE DECIDING TO PRINT THIS This is to allow you to use a Milwaukee Hard Hat Headlamp (Part #2163-21) as a work light that can be held or stuck somewhere with a magnet.…

3D Printed Street Fighter Headlamp

Full 3D printed Street Fighter-style motorcycle headlamp, Inspired by Ducati Headlamp. Using Devil Eye Animated LED and Mini projector lamp. I print it using ABS filament but u can use other material that can survive in the hot…

BRAUN 500 Lumen Work Light Headlamp Conversion Clip

This clip is specifically designed to securely hold the lamp on your head, making it even more versatile for mechanics, DIY enthusiasts, and anyone who needs reliable lighting on the go. Key Features Design : The clip's center of gravity…

Replacement Clip for Black Diamond Cosmo-R 350 Headlamp

This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…

BNR32 - Nissan Skyline R32 GTR - Headlight / Headlamp stud adaptor

Hey team, This is a fairly obscure print for those Nissan R32 GTR owners out there with “N1” headlamps and are missing the central stud which holds on brackets for the centre grille. Example image of the standard stud which should be…

Decathlon Bivouac - Headlamp mount

This 3D model of a mount for the Decathlon Bivouac 500 headlamp is designed to provide secure attachment while allowing the headlamp to be adjusted to various positions, thanks to the central notch. Key Features: Main Surface : A flat…

Crane headlamp back cover - Crane Stirnlampe Deckel

A replacement back cover for a Crane headlamp, sold by Hofer / Aldi. This is for the small red back-facing light. Print slowly and precisely in transparent filament. Support only needed for the bottom ring overhang, should NOT be needed…

Decathlon HL 900 headlamp repair strap bracket

I have this great headlight HL900 by Decathlon for a few years but Main brackt that holds lamp itself on strap broke. Sad but true reality. I tried to use several types of glue to repair it but with no good efect. So I designed my own…

Minimalistic stand for FENIX headlamp/flashlights with magnet

Minimalist Stand for Fenix Headlamps – A Practical Solution for Desk Lighting This compact and lightweight stand is the perfect accessory for your Fenix headlamp when you want to use it as a desk lamp. Its smart design allows it to fit…

Nitecore Tiki magnetic ultralight headlamp adaptor

Background and options I searched for a ultralight trekking headlight and decided to use my nitecore tiki ( LINK ) wich is ultralight and super useful: extra small and ultra light almost watertight - rainy weather is not a problem (IP66…

Black Diamond headlamp detent repair

My Black Diamond headlamp had a bracket with two fingers that let the tilt adjustment click into place. The fingers broke off and the light would flop down. I used scotch tape to hold the angle for a couple years. Then I printed a TPU…

BRAUN Headlamp (HARBOR FREIGHT) Cap clip mount

Braun Headlamp Cap Clip – Securely Mount Your Harbor Freight Headlamp to a Hat! Upgrade your hands-free lighting setup with this custom-designed cap clip for the Braun LED Headlamp from Harbor Freight! This 3D-printed mount allows you to…

Asaklitt Headlamp head strap mount

The plastic piece where the headstrap is attached to the battery pack snapped on my headlamp, so I designed a replacement piece. The curve on this model isn't a 100% perfect match, but it's good enough. Printed in PLA with 0.15mm layer…

Headlamp holder for common 8 mode 1200 lumen usb rechargeable headlamps

Headlamp holder for common 8 mode 1200 lumen usb rechargeable headlamps

Silva Free Headlamp helmet mount

This is a mount plate to attach a Silva Free Headlamp to a bike helmet. You can print this mount for the lamp only and keep the battery in a pocket, connected by a long cable or print a second one to mount the battery on the helmet too.…

Headlamp Gridfinity Bins 3x3 and 3x2

a 3x3 and 2x3 Gridfinity Bin for your headlamp, it works with generic headlamps but was designed with the Nitecore HC68. The 3x3 works great with headlamps with overhead straps, the 2x3 is smaller but can fit the same headlamp if you're…

2x 18650 holder for headlamp strap

I have a very nice headlamp, but it's way too power hungry for a single 18650 cell, even after i swapped it for one with more capacity. The charging circuit is way too weak, so it takes ages to recharge I created a simple plate that fits…

Headlamp Gridfinity Bin 3x1

If space is the only concern you have, then this is the Bin for you The 3x1 Headlamp Gridfinity Bin squeezes in a Generic Headlamp into as small a space as possible.

Battery cover for Decathlon/Forclaz HL900 headlamp

I wanted a protective cover for the spare batteries in my HL900 head torch from Decathlon. So that the contacts are protected, but above all the USB-C port doesn't get dirty.

Ridge Monkey VRH150 Headlamp Holder Bracket

Replacement part

Eveready LED Headlamp Hat Clip

This model allows you to ditch the elastic headband that Eveready LED Headlamps come with and just clip it directly to the brim of a baseball hat. The right angle model is meant to be worn on top of the bill of the cap and can illuminate…

Headlamp Lifter Assembly Adjuster Rod Ends

These are the two rod ends on the headlamp lifter linkage for a Ferrari 328. These parts (even if you could find them as new old-stock) are nearing 40 years old and are prone to being brittle. When they break, the affected headlamp no…

Shade for headlamp

Easy print in 2 parts. PETG recommended. Put together and optionally screw it with M3x4 or M3x6mm. Clip on your headlamp. (Diameter 23mm / Bracket distance 50mm / e.g. Sofirn H05A or equivalent)

Volvo S60 Headlamp Wash Cap Holder

Print verticaly or horizontally with supports (stronger). Use weather resistive material - PETG, ASA, etc.

Petzl Tikkid Headlamp Battery Key

This key opens the Petzl Tikkid headlamp battery case without needing a metal tool (screwdriver or coin). Design features Key to match the screw head (including curvature), for easy turning. Wider handle for a solid grip. Wording “TIKKID”…

Petzl headlamp helmet clip

Petzl headlamp helmet clip

BioLite Headlamp Diffuser

Wanted a diffuser for my BioLite Headlamp. I will be using it to act as a lantern for our tent. This was printed in white PETG.

Replacement headlamp mount

Model of the mount for the Solight WN32 front LED headlamp. Reinforced thickness. I recommend printing with the support side facing the heated bed. After printing, it's necessary to sand off the remaining supports. In my case, PETG and/or…

Headlamp adapter for bicycle

Mounting adapter for an LED headlamp and a flashlight holder for a bicycle. Primarily tested with the Solight WN32 headlamp. Test print was done using PETG material.

Lens Cover for LED Blukar Headlamp

Cover your Blukar headlamp lenses :) Nothing special, just print :)

Makita DML800 18V LXT Lithium-Ion Cordless LED Headlamp Hanger Wall Mount Holder Easy Print

Makita DML800 18V LXT Lithium-Ion Cordless LED Headlamp hanger, wall mounted holder, labelled with DML800. Two versions, horizontal and vertical. Attach with two number six screws. Print as pictured. No supports needed. Battery Holder…

Customizable Flashlight to Headlamp Adapter

Flat Design Printed flat for strength and compactness Can be bent into a curved shape by first soaking it in hot to boiling water (temperature depends on the filament) If using TPU or a flexible filament, use the no cutout version…

Wall mount for a headlamp gadget

Wall mount for a headlamp gadget Simple and quick to print modular wall mount for headlamps, magnifiers, testers, etc. Designed to use M3 countersunk screws (maximum head diameter 8 mm). Can be fixed with standard screws and expanded with…

Headlamp holder replacement led lamp

v8 has a larger base and is more comfortable to wear - even more comfortable than the original holder.

Cheap chinese headlamp holder for bike

Cheap Chinese lamp holder. Lamp from aliexpress is around 1-3$ so you will not get stressed when lamp is snatched off.

Headlamp to flashlight adapter

There are a lot of models that can turn a flashlight into a head lamp. But what if you have a headlamp but want a flashlight? This is a handle, that you can clip the body of a flashlight onto. And then you basically have a flashlight. The…

Lectric XP4 Elite headlamp frame mount

Tools needed: Dremel; drill; mm hex wrench's; 8mm socket wrench; 3d printer Parts: 40mm M5 bolt, M5 nut, M5 lock washer, 16mm M3 self tapping screw, 10mm M3 self tapping screw, superglue

Headlamp Strap Upgrade

I originally made this for the Oculus Rift ( https://www.printables.com/model/156295-oculus-quest2-quest3-strap-upgrade ) and it works great. Recently, I realized I had the same issue with my headlamp so I resized it to fit the narrower…

Side Mount for the bands of a Headlamp and Goggles for the Dräger HPS 4500 Helmet

The Dräger HPS 4500 has little knobs on each side that can hold the visor for that helmet. However some departments only hand out goggles. The little knobs can hold the one band of the googles well enough that it won't slide up and off…

Nitecore HC65 Headlamp Head Strap

This part replaces the headrest on the Nitecore HC65 headlamp. Its function is exatly same as the original. Printing: The SidePieces are to be printed from flex material. Made mine from TPU 98A and it works verry well. The Headrest is…

Nitecore HC65 Headlamp Head Strap

This part replaces the headrest on the Nitecore HC65 headlamp. Its function is exatly same as the original. Printing: The SidePieces are to be printed from flex material. Made mine from TPU 98A and it works verry well. The Headrest is…

Fenix HL12R V2 headlamp bracket

Replacement bracket for Fenix HL12R V2.0 headlamp. This model is a bit thicker compared to the included one, with wider headband tabs as well (one of mine broken, that's the main reason the model was created). Angle adjustment is on a…

Kia Headlamp Dust Cap

Created this replacement headlamp dust cap for a Kia Cee'd 2006. Should also fit in these models: Sportage 2010 Sorento 2006 Carens 2006 Sedona 2006 Seele 2012

Headlamp Helment Clip Mount Petzl Swift RL

Small Clip and Holder for Headlamps on Helmets. Printed in PETG and used standard adhesive tape to fix on the Helmet.

LUMONITE Vector Headlamp Mount for Peltor WS Alert XPV

This is a custom mount designed to attach a LUMONITE Vector headlamp to the top band of PELTOR WS Alert XPV hearing protectors. It allows you to place the lamp on top of the headset without using the original headband or helmet adapter.…

Headlamp modification: replacing AAA cells with lithium batter

Basic case to hold a battery charger and battery, + clamps. Tired of AAA batteries try this. Like if you use it! This motivate me!! Thanks!

shock antihalo protection MEANDRE headlamp

shock protection for MEANDRE Technology lamp and to remove the halo effect of the glass on the eyes print in TPU protection antichoc pour lampe MEANDRE Technology et pour supprimer l'effet de halo de la vitre sur les yeux imprimer en TPU…

headlamp holder / držák čelovky

Náhrada držáku čelovky za originální kus. Navlékací na řemínek

Audi A4 B6 headlamp back cover Bi-xenon

Replacement headlight covers… Model created by redrawing a 3D scan of the original cap Print it out, insert 6x hot nut M3x5x5 + 6x M3x8 screw and insert the original seal and snap it onto the headlight.

DYNAFIT DAYMAKER HELMET HEADLAMP HOOK

Nahradni hacek pro uchyceni celovky/popruhu pro helmu DYNAFIT DAYMAKER

Energizer headlamp clip

Replacement clip for Energizer Head lamp I broke the head band clip on this headlight, I liked the headlight so much that I decided to make a new clip. Used Pet-G for strength. 95% infill. Used support but not necessary to remove support…

Headlamp Bracket (Campgo)

My headlamp fell off and the bracket broke. So Ive made one. Printed in PETG with supports.

Cammoo Desk Headphone/Headlamp Holder

I recently purchases a new H2D and I also bought the CAMMOO Heavy Duty Workbench for it to go on. After putting it together, I noticed that there were a few holes that were not being used after assembly. It also had a few extra bolts just…

bike headlamp holder Fenix HM50R, Fenix HM51R

bike headlamp holder Fenix HM50R, Fenix HM51R, držák čelovky na kolo Fenix HM50R,Fenix HM51R

Specialized Stix to Headlamp Adapter

I'm an avid cyclist, and my rear light of choice is the Specialized Stix ( https://www.specialized.com/us/en/stix-elite-2-taillight/p/173394?searchText=49120-2100&color=270193-173394 ). These have multiple light modes, are bright, and…

NEBO Illumatrace Blood Tracker Headlamp Cover

Headlamp Hanger 26mm Strap Coast

Headlamp hanger for units with head strap width of 26mm or under. Sized for attaching with two small command strips or two screws 40mm apart. Pictured in use with Coast headlamps. Print as pictured. No supports needed.

Mounting Bracket for a Princeton Tec Apex headlamp

My son's headlamp bracket broke, and Princeton Tec doesn't sell new ones. I can't afford another $75 headlamp, so I modeled up a replacement as best I could. I printed mine at .15mm layer height on a Core One + using Ecomax PLA from…

Headlamp gridfinity box

For two headlamps with straps. Keep it neat. Uses the least possible filament. 0% infill, no supports

Black Diamond Spot headlamp hinge replacement

Replacement for the hinge part on the back of the black diamond Spot headlamp as mine broke. Print in PETG with 100% infill.

Helmet holder for Fenix HM55R headlamp

Two versions: Mainly designed for Decathlon Rockrider Race helmet. 1) Rounded bottom: intended for Decathlon Race helmet 2) Flat bottom: customize to your helmet radius/shape Printed on side with tree supports with PETG. Working fine for…