1 / 1
Crane headlamp back cover - Crane Stirnlampe Deckel — zdjęcie 1

Crane headlamp back cover - Crane Stirnlampe Deckel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement back cover for a Crane headlamp, sold by Hofer / Aldi. This is for the small red back-facing light.Print…

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A replacement back cover for a Crane headlamp, sold by Hofer / Aldi. This is for the small red back-facing light. Print slowly and precisely in transparent filament. Support only needed for the bottom ring overhang, should NOT be needed for the small notches. I printed with a 0,2mm nozzle at 0,25mm wall width on a raft (due to using a glass plate) with 4 bottom layers. First layer height 0,2mm, all others 0,1. I would not recommend printing coarser due to the fine details on the latches.

Print Settings

Supports:

Yes

Resolution:

0,1

**Infill:**

15

Filament: Nobufil PETG transparent PETG

Category: Replacement Parts

Tagi