1 / 1
Crane headlamp back cover - Crane Stirnlampe Deckel — image 1

Crane headlamp back cover - Crane Stirnlampe Deckel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement back cover for a Crane headlamp, sold by Hofer / Aldi. This is for the small red back-facing light.Print…

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
42
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

A replacement back cover for a Crane headlamp, sold by Hofer / Aldi. This is for the small red back-facing light. Print slowly and precisely in transparent filament. Support only needed for the bottom ring overhang, should NOT be needed for the small notches. I printed with a 0,2mm nozzle at 0,25mm wall width on a raft (due to using a glass plate) with 4 bottom layers. First layer height 0,2mm, all others 0,1. I would not recommend printing coarser due to the fine details on the latches.

Print Settings

Supports:

Yes

Resolution:

0,1

**Infill:**

15

Filament: Nobufil PETG transparent PETG

Category: Replacement Parts

Tags