Fenix HL12R V2 headlamp bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bracket for Fenix HL12R V2.0 headlamp
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- GNU General Public License v3.0
Replacement bracket for Fenix HL12R V2.0 headlamp. This model is a bit thicker compared to the included one, with wider headband tabs as well (one of mine broken, that's the main reason the model was created). Angle adjustment is on a stiffer side, but it helps to keep the body in place while moving/shaking head.
Printing instructions
Resolution: ≤ 0.16 mm
Perimeters: 4 or more
Supports: not needed if printed in default orientation. There are 4 built-in thin supports, which should be carefully removed, they are marked on the last picture.
Material: PETG or something similar for better strength
Contact area with a bed is quite small, so add brim if your bed adhesion isn't perfect.