Fenix HL12R V2 headlamp bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement bracket for Fenix HL12R V2.0 headlamp
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- GNU General Public License v3.0
Replacement bracket for Fenix HL12R V2.0 headlamp. This model is a bit thicker compared to the included one, with wider headband tabs as well (one of mine broken, that's the main reason the model was created). Angle adjustment is on a stiffer side, but it helps to keep the body in place while moving/shaking head.
Printing instructions
Resolution: ≤ 0.16 mm
Perimeters: 4 or more
Supports: not needed if printed in default orientation. There are 4 built-in thin supports, which should be carefully removed, they are marked on the last picture.
Material: PETG or something similar for better strength
Contact area with a bed is quite small, so add brim if your bed adhesion isn't perfect.