Counting matching models…
I really liked my PD36R, but I didn't like that I couldn't stand it on end to save me having to hold it in some situations, so I designed this endcap. It snaps on very securely. It also prevents the button being pressed accidentally,…
just a simple and quick friction locking diffuser for a Fenix PD25 flashlight. Translucent colors and pure white filaments seem to work best. If you liked and found this print useful, please give it a like.
Gridfinity holder for Fenix flashlight, 2xAA battery version. The model was designed with FreeCAD, it is based on this parametric model: https://than.gs/m/121299 This model is part of the gridfinity collection that you can find here:…
Fenix HM65R helmetmount Print with PETG Can be mounted with zipties or doublesided tape
Eine magnetische Halterung für die Fenix E28R Die V2.0 der Taschenlampe wird nicht passen! Zusätzlich wird eine Sechskantschraube M5x12 mit passender Mutter und ein runder Magnet 20x6mm benötigt! https://amzn.eu/d/0q1aXlV Der…
For multicolor users, print this Fenix born from blue fire. If you want support me https://nemanjajovanovic.gumroad.com/coffee
Print on its side for a strong hook hook may be tight from excess support so sand and place on the bottom skadis board to loosen
I made a simple charging stand for my Epix 2 PRO 51. Using the original charging cable. It should also fit the Fenix 6/7/8 (please let me know). Added version with thread lock (nut print 0,12 mm layer height). 4mm hex.
The part should fit most Garmin devices with a 26 mm band, but has only been tested on a Fenix 7x and Fortrex 801. I originally designed this part to fit a Fortrex 801 on my Fatbike for winter adventures. There were numerous iterations…
Garmin Fenix 8 bike mount adaptor (remixed). I have adapted this model to fit the Garmin Fenix 8. I filleted all corners to remove potential stress points. I also made a slim (aero) version that reduces the height of the adapter to the…
Exhaust duct for BitFenix Prodigy case from 2012. Only compatible with AMD Wraith Prism CPU cooler in pull configuration. The idea is to use a 120mm fan at the top that will suck the air from the CPU cooler (pull configuration) so hot air…
Tope de guaya para el marco de una bicicleta de ruta ridley fenix que se muestra a continuación. Cable stopper for the frame of a Ridley Fenix road bike, shown below. Imprimir relleno 100%, PLA o resina.
The TPU cover for the Fenix LR40R is easy to print and attach. The cover provides optimal protection for the Fenix LR40R against scratches, drops, and bumps. Naturally, the Fenix, including the cover, fits in the original case. Print…
Two versions: Mainly designed for Decathlon Rockrider Race helmet. 1) Rounded bottom: intended for Decathlon Race helmet 2) Flat bottom: customize to your helmet radius/shape Printed on side with tree supports with PETG. Working fine for…
Same as original. Print settings: 15% cubic infill, 0.12 mm layer height, 0.4 nozzle, 5 walls.
Gridfinity holder for both of the flashlights (WF25RM & PD36R) keep it nice and tight inside your toolbox.
Clona (kšilt) na svítilnu Fenix BC26R pomáha snížit oslnění účastníků provozu v protisměru. Doplnil jsem i logo firmy Fenix, které lze v projektu odstranit. Model je prototyp, který bude teprve testován v terénu. Doplňující clonu…
I really liked my PD36R, but I didn't like that I couldn't stand it on end to save me having to hold it in some situations, so I designed this endcap. It snaps on very securely. It also prevents the button being pressed accidentally,…
Print the main body on end, and the tab on its side for best results. Use M3 heatset inserts in the body, and countersunk screws to secure the tab. I prefer ASA but PETG would likely serve well. I printed at 100% infill Category: Sport &…
Gridfinity holder for Fenix flashlight, 1xAA battery version. The model was designed with FreeCAD, it is based on this parametric model: https://than.gs/m/121299 This model is part of the gridfinity collection that you can find here:…
Wallmount holder for a Fenix TK35UE flashlight. Two mounting holes for #9 construction screws.
Stand is designed for Fenix 5X Plus watches. There are two versions available - open from one side or not.
Fenix HM65R helmetmount Print with PETG Can be mounted with zipties or doublesided tape
I created this piece to protect the flashlight lens and button from accidental presses. The flashlight has protection before accidental presses, but this model gives you more protection. This cares the lens and button from scratches and…
This is a simple snap-on adapter for your Fenix LD20 so it can be fit to mounts that are meant for 1" frame flashlight, like many tactical lights. Print with one of the ends facing the buildplate, and after printing & clean up it should…
This strap loop was designed to replace the original that snapped. it has the protrusion moved to the base plate so does not need to be supported. I printed it in TPU and it's far better/stronger than the original.
This is a mount for the garmin fenix 3 hr watch. It helps you securely mount your watch on your bike. It is a tight but very secure fit
Adapter from UTG M-LOK Offset Flashlight to Fenix TK11R.
This model cans save you a watch bracelet !!! (And costs nothing…) I printed it without supports (there is a good side to do this) out of PLA, and it lasted 9 months (I removed it because I wanted a PETG one, but the PLA one was really…
The Cap covers the lens and the on/off switch. The caps are printed with FLEX/TPU filament (98A)
Easy to make a cute Fenix keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Eine magnetische Halterung für die Fenix E28R Die V2.0 der Taschenlampe wird nicht passen! Zusätzlich wird eine Sechskantschraube M5x12 mit passender Mutter und ein runder Magnet 20x6mm benötigt! https://amzn.eu/d/0q1aXlV Der…
For multicolor users, print this Fenix born from blue fire. If you want support me https://nemanjajovanovic.gumroad.com/coffee
Print on its side for a strong hook hook may be tight from excess support so sand and place on the bottom skadis board to loosen
Eine Halterung für die Kabelfernbedienung der Taschenlampen von Finex, Modell AER-02. Sie könnte auch für die -05 passen. Diese steht mir allerdings nicht zur verfügung. Die Fernbedienung rastet am Ende der Halterung leicht ein und kann…
Tištěno z přírodního PETG Aurapol na Bambulab P1S. Variabilní výška vrstvy, primární výška vrstvy 0,16mm - kavalita/rychlost 0,20, rádius 5. 5 perimetrů, 6 horních a 6 spodních vrstev, 100% infill - u všeho koncentrický vzor Tištěno s…
I made it of PA66 filament, but uoy can create it of your's choice. I recommend little bit flexible filaments
In addition to the screen protector on the display, I wanted to protect the watch all around while wearing it. It’s not a full-fledged protection, but it does prevent the most significant scratches. The case absorbs light impacts;…
Ein Diffuser für die Fenix PD35R. Bestehend aus drei Hauptlementen die mit Ausnahme der Deckplatte ohne stützen gedruckt werden kann. Im Anschluss alles zusammenkleben. Als viertes Teil habe ich einen Schirm konstruiert der nur…
I printed it in PETG It is for the old variant of the Fenix HL10
I made a simple charging stand for my Epix 2 PRO 51. Using the original charging cable. It should also fit the Fenix 6/7/8 (please let me know). Added version with thread lock (nut print 0,12 mm layer height). 4mm hex.
This is dust protector for charging cable of Garmin Fenix watches
I made this button cover to prevent accidentally turning on the flashlight in a pocket or bag. Also works great as a red light diffuser and filter at night to preserve night vision. Printed in red TPU95A with 0.8mm nozzle on an Ultimaker 3.
This is my first attempt at a remix to charge my wife's watch and mine. Now both the Garmin 5s and the Garmin 5X fit. It's not a big deal, just a little adjustment. I hope it helps someone. The writing at the foot of the Stand has been…
Minimalist Stand for Fenix Headlamps – A Practical Solution for Desk Lighting This compact and lightweight stand is the perfect accessory for your Fenix headlamp when you want to use it as a desk lamp. Its smart design allows it to fit…
These are placeholders for the Garmin Fenix 8 47 AMOLED and Solar. These are for printing out to see how that size looks on your wrist before you dump a lot of money on a watch that might be too big or small
These are placeholders for the Garmin Fenix 8 51 AMOLED and Solar. These are for printing out to see how that size looks on your wrist before you dump a lot of money on a watch that might be too big or small
It solves batteries rolling all over the table. Storage is planned for 18650 batteries. After printing, the parts must be glued superglue. Rafts: No Supports: No Resolution: 0.3mm
Easy to make a cute Fenix keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Garmin Fenix7 watch holder for MarinBikes bicycles Compared with the original, I just enlarged the diameter of the bracket and lengthened the bottom so that it would fit my bike. The attachment system remains the same as the original,…
Charging stand for charging iPhone 16 PRO and Garmin Fenix 8 smartwatch. Designed for magsafe charger: https://www.istores.cz/produkt/istores-by-epico-fast-magnetic-wireless-charger-space-gray-2209584 Designed for Garmin connector…
How to charge a Garmin Fenix (5) without charging cable? DIY, building your own cable. Designed with FreeCAD, moddels available. To charge the watch, you can use the two outer connections for charging, regardless of polarity (works in…
I created this from scratch in Fusion 360, but used the https://www.prusaprinters.org/de/prints/123832-garmin-watch-stand design as template. It needed to be turned 180° in comparison to Fenix 5 and I also made the hole a bit less deeper,…
Attachment for ETA Fenix 1233 90000 / ETA Fenix 2233 90000 ANTI SQUEAKY !!! ANTI DAMAGE NO SUPPORTS FACE UPWARDS
It prevents the dust-empty button from being pressed unintentionally. It happened to me every time I was cleaning the car, so I had to hoover it again :) That's why I decided to create a protector for the release button. Supports are…
Blind for those who do not want to drill for Eta Fenix SUPPORTS NEEDED
2x3 gridfinity tray for popular vaporiser Fenix Mini and included accesories.
Este modelo 3D retrata uma majestosa fênix em estilo artístico e abstrato, composta por camadas fluidas que evocam movimento, elegância e poder Idel para decoração, seja em prateleiras, mesas ou painéis de parede A fênix, símbolo de…
Problem: i have helmet and want headlight on it, i bought original adapter and wanted to glue it on top with supplied tape … didnt work. So i wanted to more robust solution. Printing: upside down 5 perimeters 2mm shell i chosen ASA, ABS…
i would have made the middle part with my laser cutter, and glued them together
Overview This custom-designed charging dock combines function and minimalist aesthetics, tailored specifically for Apple MagSafe-compatible iPhones and the Garmin Fenix 7/8 smartwatch. The dock consists of two interlocking base…
The flashlight itself has a magnetical bottom. However, with this model you can mount it to wooden or other non-magnetical surfaces. It has a 68° angle. This can be modified while turning the flashlight in mount. Dedicated hole for a wood…
Designed this to hold my flashlight on my opengrid wall, but would work with any Multiconnect system.
The files include: - 111 expertly pre-separated parts for easy printing, assembly, and wear - 131 pre-cut parts for smaller printers - Engineered for working lights on the collars. The windows are separated and can be printed in a…
I like a clean look. That`s why I built a holder for my Garmin Fenix, in which I was able to integrate the following charging cable: https://www.amazon.de/gp/product/B07KXKR8D3/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&th=1 The Gamin…
Fenix TK35UE (2018) Ultimate Edition Glass Protection
Fenix Adapter – Compatible with HM65R SuperRaptor 2 headlamps for 3M M-Series Versaflo respirator masks (requires mining lamp bracket). Important: Additional part required – 3M M-940 Mining Lamp Bracket Kit:…
Simple protection, that protects your watch from damage to the bezel. 0,2 nozzle is a must. This is ASA profile, but you can try PLA or PETG maybe the scale needs to be adjusted. Build plate is smooth for the cleanest look. It is…
Saint Seiya Phoenix Mask to print in one piece. See printing parameters below. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Mascara de Ave Fenix de Caballeros del Zodiaco a…
This is a Garmin Fenix 6 holder designed for a bike stem. It’s specifically made for the stem with a flat top side and grooves along the sides for elastic bands.
Replacement bracket for Fenix HL12R V2.0 headlamp. This model is a bit thicker compared to the included one, with wider headband tabs as well (one of mine broken, that's the main reason the model was created). Angle adjustment is on a…
I modeled this watch loop as my old Fenix 3 watch band loop got brittle and broke. It should be printed in TPU and does not need supports. I am not affiliated with Garmin and this print is done without the purpose of selling or monetizing…
It helps to better suction and function of nose aspirator. It's working without lock via air suction. I've changed the outer diameter. So now it works for variety of old replacements of the old ETA vacuum cleaner.
I needed to see my Workout stats right in front of me, so i made a support for my Fenix 6 It fits The fenix 6 and fenix 6 pro and has a width of 22mm . I think it should fit also the new Fenix 7 Pro
I like keeping a flashlight in my desk, so I created this Fenix UC30 holder for Gridfinity. I printed this in PLA with 10% infill.
diseñado con IA y pulido en blender, para colocar en el Borde del monitor
3D model of a bicycle mount designed for the Fenix HM50R V2.0 flashlight. The mount allows stable and secure attachment of the flashlight to a bicycle handlebar and is intended for 3D printing.
Any durable material can be used for printing. 4 magnets with a diameter of 10mm and a thickness of 3mm will be pressed into the model. 3 pcs on the bottom and one piece at the back. Attention! Before inserting the magnet, it is necessary…
bike headlamp holder Fenix HM50R, Fenix HM51R, držák čelovky na kolo Fenix HM50R,Fenix HM51R
Skadis mount for the Fenix E35UE flashlight or others that have a diameter of 24 mm. Uses the T-clip system.
Great design, but not stable, so I added suport plate.
The part should fit most Garmin devices with a 26 mm band, but has only been tested on a Fenix 7x and Fortrex 801. I originally designed this part to fit a Fortrex 801 on my Fatbike for winter adventures. There were numerous iterations…
Garmin Fenix 8 bike mount adaptor (remixed). I have adapted this model to fit the Garmin Fenix 8. I filleted all corners to remove potential stress points. I also made a slim (aero) version that reduces the height of the adapter to the…
