Liczymy pasujące modele…
You can buy these from me here! Consider donating to us if you like this model! This diffuser lamp shade allows you to easily use your flashlight to brighten up your office or bedroom. Currently available for the Emisar D4V2, D4K, D18,…
You can buy these diffusers from me here! If you like our models, consider giving us a 1 time donation! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize…
Tool to remove/align the button bezel on Emisar and Noctigon flashlights, useful to replace a torn or dirty switch cover or repair a faulty switch Version compatibility: 6 spoke: D1v2, D1K, D4K, DW4, DT8K, DM11 (new), M44 (maybe) 5 spoke…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This D2 holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the D2 headlamp to prevent…
Transform your Emisar D4v2 flashlight into a fancy lantern! Do you like the BLF LT1 and want something smaller? This might be just right for you! Included in this kit are two parts (consisting of three models to print): The base for a…
You can buy these from me here! Consider giving us a 1 time donation if you like this model! I have uploaded the raw .STL files, and I have also uploaded my .3mf files. The raw .STL files do not have the holes for the light made in them,…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! This diffuser for the D4SV2 is designed to radially distribute light into a useful area. Unlike other types of simple flashlight diffusers, this design…
This is a set of different tools to help flashlight bezel removal. I recommend to print them with PETG or ABS/ASA with 5 to 8 perimeters and 0,1 mm layer height. This is a growing collection, so feel free to check back later for tools for…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Emisar DW4 mount snaps right into the Skilhunt HB3 headband! There's a ridge in the design that matches up with the headband grooves in the DW4 to…
You can buy these diffusers from me here! If you like our models, consider giving us a 1 time donation! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize…
Just a quick model I made to remove the bezel on the right angle DW4 without damaging the light. Someone could probably make a better one, but I did this quickly and it works well enough. Download the 8 nub version! I originally only made…
This is a diffuser for an Emisar D4SV2 flashlight. I printed this at 0.2mm layer height, 2 perimeters, and 100% infill. You probably want to turn off “Ensure vertical shell thickness” if you're using Prusaslicer since the overhang on the…
What Is It? This is a modular lampshade which can fit on more than 21 different flashlight models. There are 5 different lampshade variations: one plain shade, and four shades with raised lettering on the inside, so that when illuminated…
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. This rotating 3D-printed mount allows you to easily attach and remove your Emisar D4V2 or D1V2 to a headlamp headband. This bracket can be attached…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
A simple tool to remove the bezel from Emisar D2 flashlight
Want to get a feel for the D4V2 before you buy one? Or do you want to design an accessory for it, but don't want to spend hours making a CAD model of it like I did? This is a scale model of the D4V2, as accurate as my calipers can measure…
You can buy one of these diffusers from me here! This is a diffuser for the glorious Emisar D18 or M44 Meteor flashlight. No supports required! I printed this out of PETG at 0.2mm layer height on my Prusa i3 MK3 at 230C. Be careful with…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! This diffuser was particularly challenging to make due to the odd shape of the DT8 head. Please see the assembly instructions photo! No supports required!…
Small protective box for the flashing kit for Emisar and Noctigon flashlights. Should also work for other USBASP flashers. Might require a bit of fitting on the USB connector's hole, I manually enlarged it a bit using a knife,…
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. Consider donating to us if you like this model! This rotating 3D-printed mount allows you to easily attach your Emisar D4K or Emisar D1K to any part of…
If you want to fix a Emisar D4SV2 Flashlight to a Gopro mount this is your adapter. I use it with a handlebar Gopro mount. The Flashlight clips in very tight. even bikepark is no problem. Link to the Flashlight:…
Print with the words on the build plate. I print using PETG from California Filament with 0.2mm layer height. Consider supporting us on Patreon!
Quick model I threw together in order to swap a spot optic into my new DW3AA.
You can purchase this item from me here! If you like our models, consider giving us a 1 time donation! This conical diffuser fits snugly onto your flashlights! It's great for lighting up tight spaces or for lighting up a tent while…
My first design - minimalistic headband plate that uses single elastic cord to make use of the Emisar D2 as a headlamp. There are two versions: Longer version that accounts for the center of mass of the flashlight, making it more stable…
Basic 1x1 ½ height Gridfinity holder for Emisar / Hanklight D4V2 Flashlight. Opening is 26.1mm. Gridfinity System This block is designed to fit into a Gridfinity base. Gridfinity is a modular organizing system and you can catch a video to…
Storage for 3 flashlights in a 1x2 size
This is an experimental print designed to work with the Emisar D4 with quad LEDs. The side walls are very thin so it should work well with opaque white filament. Print with no infill, especially if using translucent filament as some will…
This is a tool to remove the bezel of a Emisar DW4 flashlight, to replace the glass or switch the optics. I use this tool often and it has been very useful. I had this model saved for a while and cannot find it online anymore. I am unsure…
Based on Spicy3D's Legendary headband clip, this is a headband clip for the Emisar D2 flashlight which allows it to be used with any 25mm elastic headband. Here is a headband this fits with: https://amzn.eu/d/07k248Q5 I've had success…
Want to get a feel for the D4SV2 before you buy one? Or do you want to design an accessory for it, but don't want to spend hours making a CAD model of it like I did? This is a scale model of the D4SV2, as accurate as my calipers can…
You can buy these from me here! Consider giving us a 1 time donation if you like this model! These are very challenging prints due to the use of multiple 3D modelling software involved in the design of these items. I highly recommend…
Holder for Hank Light / EMISAR D4V2 flashlight. Designed to mount with double stick tape or command strip on the side of a table or nightstand. Fusion 360 file included.
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Dual D2 holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the D2 headlamp to…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H600/Emisar D2 holder snaps right into the HB3 headband! There are ridges in the design that match up with the headband grooves in the D2…
Simple diffuser for the Emisar DT8 flashlight. Printed using PETG, 4 walls, infill doesn't matter.
You can buy these from me here! Consider donating to us if you like this model! Print this heart diffuser in red or pink filament for a fun way to show your valentine that they make your heart glow! If you want to show your love for Hank,…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Emisar DW4 and Emisar D2 mount snaps right into the Skilhunt HB3 headband! The ridges of the headband mount align with the ridges on the DW4…
You can purchase this item from me here! If you like our models, consider giving us a 1 time donation! This conical diffuser fits snugly onto your flashlights! It's great for lighting up tight spaces or for lighting up a tent while…
A simple base for the Emisar D4S flashlight. Category: Tools
Wrench for Emisar D2 flashlight switch bezel
This adapter connects your D18 flashlight to a Nalgene water bottle. I printed this out of PETG using a 0.4mm nozzle. Consider supporting us on Patreon!
Lay down tray for your favorite EDC flashlight the D4V2 ;)
The pocket clip on my Emisar d4k has a big step up that always got hung up while sliding it into my pocket. This gives it a little ramp and makes it snag free. Tested on an emisar d1 and it fits perfect on that as well. Should also work…
This one printed in Sunlu glow in dark PLA. Other good option would be transparent or transparent orange PETG for heat resistance, but I couldn't warp my PLA with W2 leds on my flashlight yet. Use brim when printing, helps with 1st layer…
TPU Belt holder for the Noctigon Emisar D4V2 flashlight. Tested printing on my Prusa i3 with Overture TPU filament. After printing, use diagonal cutters to remove the spacers from the belt slot
A popular modification to an Emisar D1 or D1K is to replace the stock reflector with a beutiful Ledil Olga TIR optic. However, it's a couple mm short of being a perfect fit. The pro fix is to increase the thickness of the PCB, but…
This is a remix of the excellent Mitch3D model for Emisar D3AA. The modification allows you to use the case with KR1AA as well. Handy storage / EDC case to protect your Hanklights. Version with the built-in battery holder must be printed…
Zorya is an optic designed to mimic a conventional bulb's emission characteristics. It comes in two sizes, the D4V2 fits the smaller, M44 the larger one. D4V2 with the optional floody optics works very well, the M44 version still emits…
I built this as an alternative to buying the official flashing kit from Hank. I had everything I needed already so it cost me nothing and it works as intended. Please see the README for list of materials and tools needed as well as…
You can purchase this item from me here! This conical diffuser fits snugly onto your flashlights! It's great for lighting up tight spaces or for lighting up a tent while camping. Give it a print! Check out my video where I run it over…
I built a little ramp to streamline the pocket clip on Hank's D4K. It is held in place underneath the clip, and has worked perfectly for several months. Enjoy!
Most of the time, I hold my flashlight in my mouth, and since I was tired, I created this stand with 60 different angles to choose from, along with a satisfying click. For the gear, try printing with an extra fine setting or precision.…
inserts for the Heatsink grooves of the Emisar D4SV2 because it aint got no tritium slots
You can purchase this item from me here! If you like our models, consider giving us a 1 time donation! This conical diffuser fits snugly onto your flashlights! It's great for lighting up tight spaces or for lighting up a tent while…
Simple box design for your Emisar DA1K, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery. You will need 3x M3x20 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied…
I found multiple Emisar flashing kit cases, however, they all seemed to be friction fit. This case has 4 locking tabs that double to keep the board secure in the case. The tabs can be fragile during assembly, but once locked in place…
I don't care for the silicone headstrap that comes with the DW4 as it's annoying to install and remove the light and to adjust the pitch, plus the strap makes the edges bend inward, creating two lines of increased pressure that is…
Adapter for Noctigon / Emisar 21700 D4K / DT8K Led light. 1/ 2 Lights version
Tool to make it easier to install the pressed-in button ring of the Emisar D4S and D4Sv2 Print with 100% infill, ≥4 perimeters. PLA+ is fine
Thanks to Wuspy for the D4 model =) https://www.printables.com/model/198809-emisar-d4v2-scale-model
A spacer to use flat top 18650 batteries in the Emisar D18, without taking the polarity protection rings off. Hard to get high quality button top 18650 batteries where I live so I designed this. Takes 10mm diameter cylindrical spacers,…
A rugged storage case for Emisar D2, Emisar D3AA, Emisar DW3AA or Noctigon KR1AA flashlights from Hank Wang Case can accommodate either 2 flashlights - D2 / KR1AA or one D2 / D3AA / DW3AA / KR1AA + one spare 14500 battery. This case fits…
Carry case for the Emisar DA1 and DA1K lights. The 18650 version fits certain Noctigon KR4 models as well. The 21700 version fits Loopgear SK06 Case is only for lights with no pocket clip or lanyard ring Included are models for battery…
Pointlessly overengineered diffuser for the Intl-outdoor Emisar D18. No supports needed. The inner layer is integrated in the 3mf as a second component, so you can remove it in the slicer, if you prefer. Do consider that the flashlight…
Modified the design so it uses the brass buttons from the Convoy 4x18 and 3x21 buttontop adapters/spacers. This should be safer to use, and also have a lower resistance. To assemble: 1) Push out the brass buttons from the original Convoy…
Gridfinity trays for Int-Outdoors Emisar D4V2 with 18350 tube Thanks to Wuspy for the D4 model =) https://www.printables.com/model/198809-emisar-d4v2-scale-model
Quick and dirty mock up I threw together of the much anticipated Emisar DM11 from Hank Wang. I mostly just wanted to get a feel for how pocketable this one will be, it'll also give my kids something new to play with. The dimensions are…
Simple box design for your Emisar D3AA, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery. You will need 3x M3x20 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied…
Clicks onto the head of an Anduril or Noctigon D4V2 torch, bringing the pogo pins into perfect contact and holding them in place for programming. Hank's flashing pogo-pin kit drops into the jig and a small dot of glue holds the PCB in the…
Easily remove and resintsall DW4 bezels without scratching them or the lens. Accepts 1/4" drive.
3 inserts for SammysHP D4S Base that fit many Hanklights and Fireflylite flashlights as part of a Lantern Kit SammysHP base is here -
EMISAR D3AA 14500 EDC LED FLASHLIGHT adapter see https://intl-outdoor.com/emisar-d3aa-14500-edc-led-flashlight.html Category: Outdoor & Garden
Case for storing and protecting the 18350 versions of Emisar D4v2, DW4 and Noctigon KR4 Requires minimum 4pcs of 3mm x 1.5mm magnets. Optionally up to 8 magnets in 4 stacks of 2 can be used to increase lid's retention force (source:…
Simple box design for your Emisar D4K, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery. You will need 3x M3x20 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied…
Simple box design for your Emisar D4SV2, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery. You will need 3x M3x25 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin”…
This is a tool to remove the button bezel (with 6 cutouts) for Emisar/Noctigon flaghlights including the D4V2, D1, DW4, and more. Printed using an Ender 3 V2 Neo with a stock 0.2mm nozzle @ 20% infill in PLA. Source files can be found…
Easily remove and resintsall DW4 bezels without scratching them or the lens. Accepts 1/4" drive.
EMISAR D3AA 14500 EDC LED FLASHLIGHT adapter see https://intl-outdoor.com/emisar-d3aa-14500-edc-led-flashlight.html Category: Outdoor & Garden
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. This rotating 3D-printed mount allows you to easily attach and remove your Emisar D4V2 or D1V2 to a headlamp headband. This bracket can be attached…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This D2 holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the D2 headlamp to prevent…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Emisar DW4 mount snaps right into the Skilhunt HB3 headband! There's a ridge in the design that matches up with the headband grooves in the DW4 to…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Dual D2 holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the D2 headlamp to…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H600/Emisar D2 holder snaps right into the HB3 headband! There are ridges in the design that match up with the headband grooves in the D2…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Emisar DW4 and Emisar D2 mount snaps right into the Skilhunt HB3 headband! The ridges of the headband mount align with the ridges on the DW4…
Adapter for Noctigon / Emisar 21700 D4K / DT8K Led light. 1/ 2 Lights version
