Emisar / Noctigon PogoPin Flashing Jig (DIY)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built this as an alternative to buying the official flashing kit from Hank. I had everything I needed already so it…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I built this as an alternative to buying the official flashing kit from Hank. I had everything I needed already so it cost me nothing and it works as intended.
Please see the README for list of materials and tools needed as well as assembly instructions. I included the .step file so you can modify it as needed.
If you get a 404 error when attempting to download the .zip, you will have to create a folder on you PC and download each file individually into said folder. Unfortunately this has been a common issue on thingiverse as of late and is a server side problem so there is nothing we can do as users to prevent it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.24
Infill:
20%
Filament: eSun PETg Any
Notes:
I printed this with a 0.4mm nozzle and extrusion width. You will need to make sure your extruder esteps and flow are tuned well due to the relatively tight tolerances needed.
Category: DIY