Emisar / Noctigon PogoPin Flashing Jig (DIY)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I built this as an alternative to buying the official flashing kit from Hank. I had everything I needed already so it…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I built this as an alternative to buying the official flashing kit from Hank. I had everything I needed already so it cost me nothing and it works as intended.
Please see the README for list of materials and tools needed as well as assembly instructions. I included the .step file so you can modify it as needed.
If you get a 404 error when attempting to download the .zip, you will have to create a folder on you PC and download each file individually into said folder. Unfortunately this has been a common issue on thingiverse as of late and is a server side problem so there is nothing we can do as users to prevent it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.24
Infill:
20%
Filament: eSun PETg Any
Notes:
I printed this with a 0.4mm nozzle and extrusion width. You will need to make sure your extruder esteps and flow are tuned well due to the relatively tight tolerances needed.
Category: DIY