31 models
Prints in 3 pieces. Glue the clip & ring onto the main body piece. I've used PLA & superglue as of when I'm uploading, and it seems to be holding up fine. A stronger adhesive is probably a better choice though. Remove the black o-ring…
Tool to remove/align the button bezel on Emisar and Noctigon flashlights, useful to replace a torn or dirty switch cover or repair a faulty switch Version compatibility: 6 spoke: D1v2, D1K, D4K, DW4, DT8K, DM11 (new), M44 (maybe) 5 spoke…
This is a set of different tools to help flashlight bezel removal. I recommend to print them with PETG or ABS/ASA with 5 to 8 perimeters and 0,1 mm layer height. This is a growing collection, so feel free to check back later for tools for…
What Is It? This is a modular lampshade which can fit on more than 21 different flashlight models. There are 5 different lampshade variations: one plain shade, and four shades with raised lettering on the inside, so that when illuminated…
You can buy one of these diffusers from me here! This is a diffuser for the glorious Emisar D18 or M44 Meteor flashlight. No supports required! I printed this out of PETG at 0.2mm layer height on my Prusa i3 MK3 at 230C. Be careful with…
Small protective box for the flashing kit for Emisar and Noctigon flashlights. Should also work for other USBASP flashers. Might require a bit of fitting on the USB connector's hole, I manually enlarged it a bit using a knife,…
Print with the words on the build plate. I print using PETG from California Filament with 0.2mm layer height. Consider supporting us on Patreon!
You can buy this diffuser from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to maximize the…
You can buy these from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of…
This is a tactical ring for the Noctigon KR1/KR4 flashlight with 18 6 50 battery tube. 18350 version is available here . It replaces the clip or lanyard ring. Assembly is easy: Screw off the tailcap, remove both o-rings and the original…
Want to get a feel for the K1 before you buy one? Or do you want to design an accessory for it, but don't want to spend hours making a CAD model of it like I did? This is a scale model of the Noctigon K1, as accurate as my calipers can…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of the…
TPU Belt holder for the Noctigon Emisar D4V2 flashlight. Tested printing on my Prusa i3 with Overture TPU filament. After printing, use diagonal cutters to remove the spacers from the belt slot
This is a remix of the excellent Mitch3D model for Emisar D3AA. The modification allows you to use the case with KR1AA as well. Handy storage / EDC case to protect your Hanklights. Version with the built-in battery holder must be printed…
Zorya is an optic designed to mimic a conventional bulb's emission characteristics. It comes in two sizes, the D4V2 fits the smaller, M44 the larger one. D4V2 with the optional floody optics works very well, the M44 version still emits…
I built this as an alternative to buying the official flashing kit from Hank. I had everything I needed already so it cost me nothing and it works as intended. Please see the README for list of materials and tools needed as well as…
This is a tactical ring for the Noctigon KR1/KR4 flashlight with 18 3 50 battery tube. 18650 version is available here . It was designed in two parts to minimize supports. The tube can be simply press-fit into the ring. Then slide it from…
Simple pocket clip with lanyard hole for the original DM11 21700 ‘cheese grater’ style body tube. Attaches with zip ties, does not interfere with tailstanding, designed chonky to be durable, and work with backpack lumbar straps and…
A rugged storage case for Emisar D2, Emisar D3AA, Emisar DW3AA or Noctigon KR1AA flashlights from Hank Wang Case can accommodate either 2 flashlights - D2 / KR1AA or one D2 / D3AA / DW3AA / KR1AA + one spare 14500 battery. This case fits…
If you want to fix a Noctigon Meteor M43 Flashlight to a Gopro mount this is your adapter. I use it with a handlebar Gopro mount. the Velcro band is just for securing the flashlight and to avoid rattling noises Link to the Flashlight:…
This is a wall-mounted dock for the Noctigon KR1. I printed it with the following settings. Filament: PETG Infill: 15% The holes and chamfers are sized for standard #8 screws.
This is a ring to attach a lanyard to the Noctigon KR1/KR4 with 18 3 50 battery tube. Just screw off the tailcap, slide it over the tube (yeah, now it has three tubes!) and screw the tailcap back on. I designed it so that it can be…
A gridfinity module for the Noctigon KR4 flashlight. Print as you would any other gridfinity bin. The STL is fairly high polly, try the STEP if you slicer doesn't like it.
Clicks onto the head of an Anduril or Noctigon D4V2 torch, bringing the pogo pins into perfect contact and holding them in place for programming. Hank's flashing pogo-pin kit drops into the jig and a small dot of glue holds the PCB in the…
Easily remove and resintsall DW4 bezels without scratching them or the lens. Accepts 1/4" drive.
A simple tripod holder for the noctigon meteor flashlight. Easy insertion and removal, pretty strong if printed sideways. The thread will be too tight initially. Slowly try to free the thread by screwing in until it grips. If you are…
Holster for belt-carry of Noction KR4 and Emisar D4V2 lights. Print in PETG. There is a negative "Stress-relief" cylinder that can be moved in the slice before printing to adjust the retention force.
Case for storing and protecting the 18350 versions of Emisar D4v2, DW4 and Noctigon KR4 Requires minimum 4pcs of 3mm x 1.5mm magnets. Optionally up to 8 magnets in 4 stacks of 2 can be used to increase lid's retention force (source:…
This is a tool to remove the button bezel (with 6 cutouts) for Emisar/Noctigon flaghlights including the D4V2, D1, DW4, and more. Printed using an Ender 3 V2 Neo with a stock 0.2mm nozzle @ 20% infill in PLA. Source files can be found…
Case for storage and carry of Noctigon KR4 flashlight. Flashlight only! It will not fit flashlights with pocket clip or lanyard ring. Requires: 2x M3x10mm panhead hex machine screws for the hinge 4 neodymium pill magnets - 4mm x 2mm. For…
Easily remove and resintsall DW4 bezels without scratching them or the lens. Accepts 1/4" drive.
