1 / 11
Noctigon KR4 18650 and 18350 Storage / Carry Case — image 1
1 / 11

Noctigon KR4 18650 and 18350 Storage / Carry Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Storage case with magnetic lid for storing and carrying Noctigon KR4 flashlight with 18650 and 18350 battery tubes

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Case for storage and carry of Noctigon KR4 flashlight.

Flashlight only! It will not fit flashlights with pocket clip or lanyard ring.

Requires:

2x M3x10mm panhead hex machine screws for the hinge

4 neodymium pill magnets - 4mm x 2mm. For additional retention force a stack of 2 magnets per position can be used (total of 8 magnets 4mm x 2mm)

the magnets are press-fit

there is an optional Lid with a slot that can be filled with GITD UV-cured resin

due to variations in models (Al vs. Cu vs. Ti body), components and manufacturing tolerances, a thin (1-2mm) EVA foam washer might be needed. The washer is dropped on the bottom of the case to reduce vertical play of the flashlight and eliminate any rattle - case is designed to fit the largest version I have come across (Ti Colorful Series)

Tags