Noctigon KR4 18650 and 18350 Storage / Carry Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage case with magnetic lid for storing and carrying Noctigon KR4 flashlight with 18650 and 18350 battery tubes
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for storage and carry of Noctigon KR4 flashlight.
Flashlight only! It will not fit flashlights with pocket clip or lanyard ring.
Requires:
2x M3x10mm panhead hex machine screws for the hinge
4 neodymium pill magnets - 4mm x 2mm. For additional retention force a stack of 2 magnets per position can be used (total of 8 magnets 4mm x 2mm)
the magnets are press-fit
there is an optional Lid with a slot that can be filled with GITD UV-cured resin
due to variations in models (Al vs. Cu vs. Ti body), components and manufacturing tolerances, a thin (1-2mm) EVA foam washer might be needed. The washer is dropped on the bottom of the case to reduce vertical play of the flashlight and eliminate any rattle - case is designed to fit the largest version I have come across (Ti Colorful Series)