Search results: flashlight

Gridfinity Holder for Astrolux A01 Torch / Flashlight

A simple gridfinity holder for this handy torch. Printed in PLA, but any material should be fine.

Dummy 13 Flashlight

I used the “Staff” model from the accessories to make it, a pretty simple flashlight to illuminate the Dummy 13 halls.

Dog poop bag holder with led flashlight - Flexi leash

My sister has a dog, she wanted something for her flexi leash. However, she also wanted a flashlight so that she could see the bays in the dark :) Most of the original model remained intact. I just added a few parts. I tried as much as…

Hawkeye SuperNOVA Regular Flashlight Adapter

Hawkeye SuperNOVA Regular Flashlight Adapter Description This is a simple flashlight adapter to connect a generic flashlight to a Hawkeye SuperNOVA Borescope. The original light source was damaged by leaking batteries. This adapter adapts…

Tokyo Marui Dual Stainless (with Tactical SF XC1 Flashlight) Holster

Tokyo Marui Dual Stainless Holster with Tactical SF XC1 Flashlight To fix the lock, it needed a piece of a paper clip 37mm. And you can make a hook on the clip to a better fix. Suggested config print: layer height: 0.2 wall loops: 6…

C8 Flashlight XT30 mod for remote switch

This is a mod to attach a DIY detachable remote pressure switch to the C8 flashlight. The printed parts replace part of the stock rear switch assembly. You are also going to need XT30 connectors, and some metal strips (like those they use…

NanoBeam - Small Flashlight - Attach & Use It ANYWHERE ANYTIME (one-of-a-kind)

The application of this gadget is so versatile - you can use it anywhere. Attach it to anything using hot glue: Knifes - so you can see what you are knifing (not legal advice) Phones - so you can feel like a professional photographer, or…

wurkkos FC11 flashlight holder for chest pouch

I needed a flashlight holder for wurkkos FC11 for my chest pouch at work so I made one. printed with petg. has a hole for a magnet to help but work with out it. Print it standing up otherwise the clip is not strong enough to bend and…

Flashlight Ballmount

I was trying to find a Flashlight mount that I could use with the Articulating Arm from Sneaks . I couldn't find one, but I did find this Flashlight mount for a tripod on Thingverse and was using this generic webcam mount for the…

Customizable Flashlight to Headlamp Adapter

Flat Design Printed flat for strength and compactness Can be bent into a curved shape by first soaking it in hot to boiling water (temperature depends on the filament) If using TPU or a flexible filament, use the no cutout version…

Bike flashlight holder (Ledlenser T7.2 or similar)

First I made a version that is held down entirely by velcro strap, but realized that PETG work great even without a strap, so I made a version that can be held together with a glue. Some might prefer velcro version as it can act as a…

Meade AutoStar II Hand Controller flashlight window

When repairing my Meade Autostar II hand controller, I accidentally lost the small red window that covers the front led. Instead of leaving the opening exposed to dust, I decided to design a replacement part and print it myself. This…

Flashlight Diffuser (for OLIGHT i3T EOS & Standard AAA Flashlights) - Pine Makers

This flashlight diffuser transforms your flashlight into a versatile colored light source. Simply insert a small plastic sheet of your desired color into the diffuser, and your flashlight beam will be filtered to match. This download…

Airsoft flashlight mount for carbon outer barrel - 30mm

I made a way to mount an airsoft/tactical flashlight (from aliexpress) on a 30mm OD carbon fiber barrel. Fits fairly snug, mounts with 2 screws, I believe M4. I will do a picatinny one as well later, perhaps. Print upright, does not…

Maglite Mini 2xAAA Flashlight Holder Wall Mount Magnetic and more

Maglite Mini 2 x AAA flashlight holder using magnet or command strips or screw. Magnet print sized for a "25lb Magnetic Hook" replace the hook with a M4 x 8mm screw and washer. Includes versions for mounting with two poster command strips…

Skadis Large Flashlight Holder

Designed for Streamlight/Streamlight Dualie Intrinsically Safe flashlight, but would probably fit a couple other models. Prints great without support, angle pegs upwards. Your mileage may vary for other flashlights but CC BY/SA for…

Thrunite Archer Mini flashlight button protector / cover

Had issues with my flashlight turning on in my pocket so made a set of button protectors / caps. One is solid and has to be removed to turn on the flashlight and the other has a raised rim around the button, Both cases the cap just slides…

Gridfinity Flashlight Tray (3x1)

3x1 Gridfinity tray for a flashlight of length 112 mm with a diameter of 33 mm at the top and 27mm at the bottom.

Peggit Hook (Coast TX1R Flashlight)

You will need to print the mounting part of the model from the wonder work here:

Kensun Flashlight holder (MC_HSW, Gridfinity)

Multiconnect for HSW and the Gridfinity base are both optional, choose the model accordingly. (Two slots for multiconnect on the backside to put it up an HSW.) Lose fit for lamp and the two 26650 slots. The kudos go to Zack Freedman and…

Craftsman V20 CMCL020 LED Flashlight Holder

Craftsman V20 CMCL020 LED flashlight holder, wall mount with two holes 40mm apart. Print as pictured. No supports needed.

animalcompany flashlight bag

for some reason certain printers don't print the side pockets on the bag, so be aware of that.

animal company flashlight

Flashlight

Forever Flashlight

What does forever mean? you can service this and the components should last a lifetime. its overbuilt and under utilized 12amp BMS only using 3amps. 20AH LIFEPO4 Battery. it will run for over 50 hours. you can stick in in a go bag for 5…

Gridfinity Wuben G5 (x4) Flashlight Docking Station

Gridfinity Docking Station for 4 Wuben G5 Flashlights Keep them charged, make them easily grabbable, Cool mood lighting too. Do you have a bunch of Wuben G5 flashlights? (If you don't, why not? they're pretty awesome!) - Now, how to do…

Gridfinity Bin for Makita CXT Flashlight ML107

This bin is designed specifically to hold the Makita CXT LED Flashlight (ML107) for Zach Freedman's Gridfinity system. There is a slot for the orange diffuser that is included, and the flashlight still fits in the bin even with the…

Gridfinity Bin for Makita LXT Flashlight DML817

This bin is designed specifically to hold the Makita LXT LED Flashlight (DML817) for Zach Freedman's Gridfinity system. There is a slot for the included orange diffuser, and the flashlight still fits in the bin even with the diffuser…

Case for flashlight FA-101 18650

FA-101 flashlight housing with 18650 battery

Flashlight Sign

Designed in Tinkercad.

1x18650 Power Bank Holder Stand for Handheld Flashlight

This is a 3D printable holder/stand designed to convert a 1x18650 power bank into a convenient handheld flashlight or lamp. The model is optimized for printing with PETG or PLA filament. Print it in the orientation shown in the photo,…

Belt Holster for Klein 56074 flashlight

I work in the food industry, so pockets are a no go. This leaves me unable to place this flashlight in my pocket. I came up with this design to hold my Klein 56074 flashlight. I printed in asa, 4 perimeters, 25% honeycomb infill. printed…

Nerf 1 inch (25mm) flashlight holder

This is my second remix of Oliver's nerf accesories. This time it's a flashlight holder for 25mm or 1 inch simple led torch. Quite useful and cheap cuz the torch this is based on is 5 pln ( approx. 2 usd) Auchan flashlight. Recommend…

Clip-A-Cap (Flashlight)

Flashlight Mount for Clip-A-Cap: The Modular Accessory System Clip-A-Cap is a modular mounting platform that transforms almost any headwear into a versatile, hands-free tool station. Built on a specialized "Claw & Ball" friction-fit…

Flash light holder for a ALONEFIRE H42UV UV Flashlight

A holder for a ALONEFIRE UV flashlight. Link to the flashlight. ALONEFIRE H42UV 36W Professional UV Flashlight: https://a.co/d/0eJLXSxR Category: Camera

Useless Hose Nozzle (Flashlight Adapter)

Clio Mk1 - Panel Support Button Flashlight, Desfroster

Clio Mk1 - Painel Support Button Flashlight, Desfroster

Wurkkos TS28 flashlight - Lens and button protection

This is a cap that slides over the Wurkkos TS28 flashlight to protect the lens and the button from damage when you store it in a bag with other items. The button cover also helps prevent the flashlight from turning on accidentally, so you…

Flashlight mount for bows / archery

This flashlight mount can be placed between the bow itself and the stabilizer. It enables you to keep practicing Archery and stay in shape, even when the days become shorter again. It fits large flashlights and with some spacer or some…

Sofirn SH40 Flashlight IKEA Skadis Holder (T-Clip)

Sofirn SH40 holder for IKEA Skadis board using the T-clip system. Made to be able to store it vertical without the need of removing the clip attachment. Perfectly printable in PLA or PETG with the print profile uploaded using minimum…

Pocket knife and flashlight holder

Organize your pocket knives and flashlights of varying sizes, widths, and thicknesses.

Adapter ring and battery - EMISAR D3AA 14500 EDC LED FLASHLIGHT

EMISAR D3AA 14500 EDC LED FLASHLIGHT adapter see https://intl-outdoor.com/emisar-d3aa-14500-edc-led-flashlight.html Category: Outdoor & Garden

flashlight holder

a wall mount for flash lights (Duracell lights)

Airsoft flashlight from Anycubic set

Hello, I have a set for the Airsoft Flashlight from Anycubic. It is specially designed for mounting on a 21mm R.I.S sheet. Designed for use on Airsoft weapons or on a helmet. The individual parts need to be glued together with super glue.…

Armytek Wizard C2 flashlight diffusor

Put this on the head of your C2 flashligh. Works with C2, C2 Pro (Nichia, WR etc). Won't work with C2 Pro Max. Add fuzzy skin to the bulge in the slicer to get better diffusion. Transparent PETG is an optimal choice for the filament.…

G26 Fidget Keychain – Underbarrel Flashlight Mod

A compact underbarrel flashlight add-on for the G26 Fidget Keychain, designed to give your slide-action toy a more tactical look. Simple to print, easy to assemble, and fully compatible with the original model. No glue required…

Mini Maglite flashlight holder (mag lite torch)

I created this model to hold my "AA" battery size Mini Maglite. I needed a simplistic one piece design that would stick vertically to a flat surface with double-sided tape. It slides in an out very easily. Hope you find it useful. 19mm…

TPU cover for Fenix LR40R flashlight

The TPU cover for the Fenix LR40R is easy to print and attach. The cover provides optimal protection for the Fenix LR40R against scratches, drops, and bumps. Naturally, the Fenix, including the cover, fits in the original case. Print…

Ledlenser P5R Flashlight Multiboard Holder

This is a Multiboard holder for a Ledlenser flashlight model P5R. It uses a single press-fit Multiboard peg. I don't know if other Ledlenser models will work with this, but the handle diameter is 22mm for reference. Prints in place…

Mount for a DARKBEAM 365nm UV Flashlight

A mount for a DARKBEAM 365nm UV Flashlight A hole is provided for a 1/4"-20 Threaded Insert to mount to a tripod. The insert is made for Wood Furniture and is not heat-set. The flashlight can be found at: https://a.co/d/06NMczS0 The…

Mount for a Alonefire SV62 Mini 3W UV Flashlight

A mount for an Alonefire SV62 Mini 3W UV Flashlight. A hole is provided for a 1/4"-20 Threaded Insert to mount to a tripod. The insert is made for Wood Furniture and is not heat-set. The flashlight can be found at: https://a.co/d/08zIDRHi…

Gridfinity Bin for Mini Flashlight

Introduction Hello, and thanks for looking at my model! I live own a three decker which means that even though I own my own home I also live in an apartment. This creates problems for hobbies like model making, scratch building and…

Parametric Flashlight Mount

Recently bought a flashlight, but it was an odd size so You couldn't find a mount for it anywhere on the Web? Here is Your solution! Download and adjust the parameters to suit Your flashlight! To mount a laser pointer or anything with a…

Flashlight for R.E.P.O arm

a mod for your R.E.P.O figure!

Lepro UV LED Flashlight Blacklight Gridfinity Tray

A 1x3 Gridfinity tray for a Lepro UV LED Blacklight. I printed in Sunlu PLA+ 2.0.

Clip for Aliexpress keychain flashlight

A clip to attach an aliexpress keychain headlight to something else - such as a hat to use it as a headlight. https://nl.aliexpress.com/item/1005008935089552.html I bent the clip a little bit using hot water, to make it hold a bit…

Convoy H1 flashlight bezel removal tool / wrench

Tool used to unscrew the newer Convoy H1 bezel with the 4 indents. This isn't for the smooth bezel. Printed in PLA , works fine.

20k Lumen 3d Printed Flashlight

Overview Designed and Engineered by Hydrance This is a full 3d printed flashlight that can reach up to 20k lumen or even 30k if you use upgraded LEDs. Compared to commercial flashlights out there that have the same power, this one is…

red light diffuser for nebo franklin swivel flashlight

wanted a red light diffuser for my nebo franklin swivel flash light ,2 color print, no supports

Pegboard Flashlight Holder

A pegboard holder for a Coast G20 inspection light. Should fit any cylindrical object with a diameter of ~16mm. Takes up a 2x2 section of 1"/26.5mm pegboard. Will need supports due to overhangs and frivolous aesthetic bits. I printed mine…

Barn Doors for Photographer / Video Flashlights

This is a complete set of 2-leaf barn doors designed specifically for large, powerful photographer and videographer flashlights (the big focusable, dimmable, color-temperature adjustable models that usually ship with barn doors). If you…

Bug-A-Salt Flashlight Mount (Duracell 31.5mm)

Have been battling moths with my Bug-A-Salt for a few months and had been holding a flashlight while trying to hunt my pray, made a side mount for a common Costco "Duracell" branded flashlight (but will work with any ~31-33mm flashlight.…

UK3AA Flashlight mount

EN: This mount securely holds the Underwater Kinetics UK 3AA eLED flashlight on MSA Gallet firefighter helmets. For quick attachment to the helmet's accessory rail or mounting points. The adjustable tilt mechanism lets you direct light…

Flashlight Color Filter

Made specifically for this flashlight. Infill and whatnot doesn't matter, be sure to support the top of the bulb.

UV Flashlight Cap and Stand for Resin Curing with Fiber Optic Cable

28.02 ID press fit cap with stand to make curing times easier. Stand allows turning flashlight on and off with more stable stance I cut various size pieces of the fiber optic to get higher up in the models Modeled for this UV Flashlight:…

TRIBORD Dynamo Flashlight Handle

I've made a handle for my broken dynamo flashlight TRIBORD from Decathlon Printed on Prusa MK3S with ABS

Flashlight Attachment to SP2022

25mm flashlight attachment to Sig SP2022

Skilhunt HB3 Headband Mount for Emisar DW4 Right Angle Flashlight

You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Emisar DW4 mount snaps right into the Skilhunt HB3 headband! There's a ridge in the design that matches up with the headband grooves in the DW4 to…

THW Gürtelhalter Paralux PX0 und PX1 Flashlight Belt Holster Technisches Hilfswerk

Was / What Dies ist eine Gürtelhalterung für die sehr verbreiteten Paralux Taschenlampe im THW Stil. Die Taschenlampe klickt in die Halterung und sitzt dort perfekt bis du sie brauchst - dann ist sie schnell zur Hand. Passend für Paralux…

Flashlight diffuser

Simply 3D print it in see-through PLA and slide it onto the flashlight. This will scatter the light in all directions, making your flashlight more versatile. You can easily attach it using the quick clip system.…

Flashlight Holder for Fandyfire model STL-V2 Wall Mount

Flashlight Holder for Fandyfire model STL-V2. Wall mount with two screws. 27mm shaft and 30.7mm top.

Portable LED Flashlight

Portable Flashlight It only takes a CR2032 battery and a LED to build this portable flashlight. The LED is attached to the portable-flashlight-led-clip which makes contact with the battery when the portable-flashlight-slider is moved…

Aukey LT-SET7 Flashlight Holder Mount Lens Cap

Aukey LT-SET7 Flashlight Holder wall mount with lens cap. Flashlight fits pointing up or down. Friction "bumps" on the back of holder to minimize movement. Holes for cord to tether cap to holder.

UltraFire WF-501B Flashlight Holder Mount Lens Cap

UltraFire WF-501B Flashlight Holder wall mount with lens cap. (31.5mm head, 30.5mm cap) Flashlight fits pointing up or down. Friction "bumps" on the back of holder to minimize movement. Holes for cord to tether cap to holder.

SkyWolfEye TLY-S21 and Small Sun ZY-R650 Flashlight Holder Mount Lens Cap

SkyWolfEye TLY-S21 Flashlight Holder wall mount with lens cap. Flashlight fits pointing up or down. Friction "bumps" on the back of holder to minimize movement. Holes for cord to tether cap to holder. Also for use with the Small Sun…

Flashlight Diffuser 25,4 mm

Flashlight Diffuser 25,4 mm (Wuben C3)

Male flashlight masturb

Použijte kondom a ponožku :DD Amatersky model, pokud budete zkoušet, napiste jak se libí :D nouzovka…

Flashlight wall mount

Just a quick little pocket flashlight wall mount you can attach to the wall with double sided tape. It can take single and double clips, and holds the lights securely. Print Settings Printer Brand: Creality Printer: Ender 3 V2 **Rafts:**…

Single Flashlight Mount for Team Wendy Helmet

The model utilises cable ties to mount a torch. It is fixed in place with the dome head bolts included on the side of the helmet. Note: I have only tested this model on the version 2.0 rails on a replica helmet.

Flashlight color filter lens mount

Just as a simple idea, would be unlikely that you have the same filter lens and the same diameter flashlight.

Shadow Hawk Flashlight Lamp

Lamp attachment for the shadowhawk flashlight. This attachment is ideal for situations where you'd like a light for camping, so it acts more like a lightbulb. Ideally you'd print with a fuzzy skin texture.

Flashlight holder on the RIS bar (D20,D22,D24,D25,D26,D28) airsoft, pistol, rifle

For best result PETG or better, 6 layers top and bottom, 6 walls, infill 35%+ cubic. No support needed. orientation as in the photo with these parameters, it will withstand a direct hit from a ball, 1.7 J. I haven't tested higher. You…

Parametric Flashlight Holder

About Parametric mount to attach flashlight onto bedside.

flashlight holder

this little retrofit uses https://www.amazon.com/dp/B0CS6Q62BQ?ref=ppx_yo2ov_dt_b_fed_asin_title rechargeable flashlight. as you can see it works well. It glues into the mysterious slit in the pages stl. allows easy access to the switch…

Low Profile 1in M-LOK Flashlight holder

Print vertically, preferably in ABS for extra strenght. Uses M3 Bolts and T-nuts for attaching to M-LOK rail “v2” version - scaled down by 10x because I made an oopsie. Now the size is correct.

Convoy S2 flashlight easy to reach bicycle mount

I wanted to be able to turn my Convoy S2 flashlight on very quickly without moving my hand from the handlebar. So I design this flashlight mount that places it underneath the handlebar close to the thumb. It consists of two parts that are…

Airsoft Picatinny flashlight

Airsoft Picatinny flashlight which use m3 screw, you can add heat insert to secure it more but it should work without. It was made for a foxter flashlight.

Simple wall Flashlight holder

Just simple flashlight holder to attach Sencor flashlight to wall Print Settings Printer Brand: Anycubic Printer: Kossel **Rafts:** No Supports: No **Resolution:** 0,2 Infill: 20 **Filament:** Gembird ABS Silver Notes: Sliced with…

Gridfinity holder for Fenix flashlight

Gridfinity holder for Fenix flashlight, 2xAA battery version. The model was designed with FreeCAD, it is based on this parametric model: https://than.gs/m/121299 This model is part of the gridfinity collection that you can find here:…

Gridfinity holder for Fenix flashlight

Gridfinity holder for Fenix flashlight, 1xAA battery version. The model was designed with FreeCAD, it is based on this parametric model: https://than.gs/m/121299 This model is part of the gridfinity collection that you can find here:…

Skadis Philips Flashlight SFL2187

Simple Skadis Holder for the Philips SFL2187 Flashlight

Flashlight bike holder 35mm bar mount Convoy S2+

Flashlight holder for MTB bars. For lighting up the dark when riding trails and mountain biking. BOM: Convoy S2+ flashlight 4x M3x20 screws 2x M3 nuts

Spare print sheet and flashlight holder for original Prusa enclosure

Store 3 print sheets and a 16mm diameter flashlight on the side of original Prusa enclosure

lens cover / cap for sofirn sp32a flashlight

lens cap for sofirn sp32a flashlight to prevent scratches. The flange is 23.6mm in diameter and has a length of 22mm. Print with a high temperature filament and keep the flashlight on a low setting or off.

Replacement lens solution for T66 flashlights

I needed to repair a T66 flashlight that was missing its lens. This lens retainer will let you use a generic 28mm acrylic lens from AliExpress. Simply insert the lens between the 3D printed part and the flashlight and screw in place.…

Flashlight

I made a Flashlight Print Settings Printer Brand: FlashForge Printer: Adventurer 5M **Rafts:** No Supports: Yes **Infill:** 15% Filament: Any Cubic PLA Glow-in-the-dark Category: 3D Printing

Flashlight

Not made for 3d printing, but you might be able to print it and use it as a prop.😀

Medieval Flashlight Wall Mount

With kids in the house our flashlights are misplaced or lost 24/7. I came up with this fun wall mount so we have a place to home the flashlight and it's easy to tell if it's not there. The I.D. of the flashlight hole is 28mm. The two…

26mm Flashlight Helmet adapter M4x8 screw needed

My helmet came with a flashlight adapter but for a different-sized flashlight. I used the Picatinny rail from the original and just replaced that flashlight holder.

UV Flashlight Holder for Multiboard System

As the title says, its a Holder for a UV flashlight based on the Multiboard system, but it also works with anything that has a diameter of 55mm. It uses a modified bolt that is a bit shorter then the official short bolt. I didn't make the…

Convoy S2+ Flashlight Camping Light \ Diffuser

Convoy S2+ is an excellent, simple, and reliable flashlight, and I’ve expanded its functionality. Existing solutions don’t meet my needs during camping and hiking because the diffuser always has to be carried separately, and it's a…