Welding Hood Flashlight Clips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips for a welding helmet/hood that hold flashlights.
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 149
- Makes
- 0
- Views
- 809
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I had trouble seeing my test pieces in my school's dark welding booth so I modeled up these clips that mount under the adjustment knobs on the hood's temples and hold small flashlights. There are 2 different sets of files, one for lights with a 16mm barrel and the other for a 15.8mm barrel. The 16mm clips fit the Coast G20 inspection flashlight that I got at the home depot for ~$10 per light. The 15.8mm clips I sized for some cheap-o inspection lights from amazon. Marked Left and Right because they are angled in at 5 degrees. You want to install them correctly otherwise you end up with Admiral Ackbar eyes and they will be completely ineffective.
Printed on an Ender 3, PLA, .2 layer height, no supports.
Remixes welcome, not for commercial use.