Counting matching models…
I propose a remix of the Tinghiverse support https://www.thingiverse.com/thing:2416282 in which I adapted the upper part for the Pinecil Pine 64 welder. In particular, the front diameter of the support has been calibrated to contain only…
The case is based on my parametric “ Rugged Box ” and is resized to fit the Docreate Gear30 Spot Welder . Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut…
Parkside welder spool bushing for PIFDS 120 B2
A wall mount/holder for a Portable Spot Welder, mounts using two screws 40mm apart. Case size of 25mm x 58mm, holder 80mm tall. No supports needed. Print on end as pictured.
Replacement latch for the wire feeder cover on certain Panasonic robotic welders. The bolt holes are meant to be added later after the original mounting holes have been measured to accommodate any differences.
The original spot welder pens that come with my new AwithZ UF20B spot welder is a bit unwieldy due to its size, the one-handed pens that can be used with it (WP-240) is not very available hence this design. This help with having evenly…
/!\ THIS IS A 3D MODEL NOT A PHYSICAL OBJECT /!\ This is a collection of 3d models ready to print the mask from Escape from tarkov. Measurements for the weldering base to hold to your head in the item pictures. For the physical item (3D…
Inspired by diy500amp.com but I needed additional space for accessories. It's a modular build. If you need all parts, after printing glue them together.
This is a holder for the SUNLU filament welder designed for the IKEA SKÅDIS pegboard system. It keeps your filament welding tool organized, easily accessible, and securely stored on your pegboard. Features: SKÅDIS compatible mounting…
Specifically engineered for portable transistor spot welders, this stand transforms a loose handheld unit into a professional, stationary workstation. Why This Design? Hobbyist spot welders are often lightweight, leading them to slide…
alles was sie brauchen ist ein PTFE schlauch den sie wie auf dem Bild in die Löcher einführen und auf diese längen dann kürzen es muss nicht perfekt sein
Holding plates for the Filament Welder/Splicer. Easy print no support needed.
Mount your filament welder to your honeycomb storage wall for easy access. This model will hold this filament welder .
This is a holder for laser welder tools like speedwire (a wire dispencer for holding silver or gold wire), a marker, tweezers and pliers.
This is a box for the XCER-110 plastic welder. You will need a dab of glue to attach the lock pin to the cover. A bit of bubble wrap will prevent the welder from moving, but not required. The text in the pictures was added using the…
I upload 3MF based on my Creality K1C, it's a monocolor printer (in my configuration) There is two lid, one without text and one with text. The one with text is desgin to be printed in two color for a mono color printer (pause and manual…
I have redesigned these amazing designs to work together on one hand Filament Welder ( https://www.thingiverse.com/thing:5505014 ) and on the other hand ( https://www.thingiverse.com/thing:5829593 ) , together they help us to solder our…
This Gridfinity organizer is for all the pieces included in the stubby gas lens kit that is sold by HTP USA for the CK17 torch. This is the air cooled torch that is included with all the standard versions (steel, aluminum, both) of their…
If you stand the welder up it falls over when you use the ends. If you lay it flat you wind up lifting it up when trying to use it. This stand is at a 45 angle that help alleviate both problems. It is currently set for a width of 85mm but…
Parkside welder spool bushing for PIFDS 120 B2
I was missing some kind of box for my spot welder, so here is the result. The model was exported from Fusion 360 - Parametric Rugged Box by Darkextratoas_243028.
If you've used or have a new Sunlu Filament Welder, then you know it's practically a 3 or 4 handed operation. This model is my first attempt at designing some "helping hands" to assist in the process. It can definitely use some…
This frame is a modified design to act as guides so your filament does not kink or pull apart when welding
This is a simple case for a kit spot welder available on the internet, like this one: diy spot welding kit adjustable soldering tool - Temu Greece During assembly be aware that the buttons are not symetrical. You need to place tha small…
A 2X2 Gridfinity holder for FNIRSI SWM-10 Spot Welder. Has room for push-fit magnets.
I Printed this on my K1 Max in one piece .You will need to split it if printing it on a smaller build plate. Standard settings for Pla. I used 10% infill.No supports needed. good luck and happy printing.
Hi Remix from: Spot welder for 18650 batteries etc by telboy2002 https://www.thingiverse.com/thing:3021491 to fit module from China: https://www.aliexpress.com/item/33044407605.html?spm=2114.12010615.8148356.3.385766162jXdzr Only main box…
Prior to welding aluminum, it is necessary to remove the oxide layer that normally forms on the surface of the bare metal. This oxide layer melts at a much higher temperature than the underlying material, so it must be removed to get a…
Print 4. Clip one one top and one on the bottom of each end of the belt, with the end extending 3mm, the length of the nibs. Melt both ends as close as you can to the jig without melting the tool. Press them together using the additional…
Summary This is an improved version of the original plexiglass frame for the Kekk Spotwelder K100. The redesigned case integrates the top plate and mounting hardware, creating a more robust enclosure. This upgrade enhances durability and…
I re-mixed this excellent piece to remove the Gridfinity framework on the bottom and added four divots to use silicone closet door bumpers as non-skid pads. Excellent design. You will need two M2 x 35mm boltslock two together on the end)…
Podstawka do mini zgrzewarki punktowej utrzymuje urządzenie w pozycji pionowej co jest wygodniejsze podczas korzystania z niej. Drukowanie: dowolny filament, ustawienia domyślne Aby zmniejszyć poślizg na stole użyłem stopek silikonowych…
A wall mount/holder for a Portable Spot Welder, mounts using two screws 40mm apart. Case size of 25mm x 58mm, holder 80mm tall. No supports needed. Print on end as pictured.
I have used pla filament for all parts Materials required for this 1- 12v thermostat 2- 12v timer 3- 12v 10a power supply 4- 12v 40w heater 5- 12v Relay 6- 12v fan 7- 3d printer throat
This is a 3D printable enclosure designed for the AliExpress DIY spot welding module (PCB model: 1005007460556374 ). The case provides protection, improved cable management, and a cleaner setup for your spot welder. ✅ Features: Custom fit…
I've bought "WISEPRO Filament Welder Splicer Connector" and was almost unable to get good result... can't find something suitable for this model, so quickly draw it in onshape feel free to remix
I recommend printing at 100% infill. I used PLA. I had a hard time opening it, but the 3D print piece did not break. PS. If you want to edit it, I am also adding the .step data.
Case for cheap Chinese spot welder. Working good. This is for version with LED see the pictures. You need 4x M3x5mm screw. In cover is integrated knob for switching power. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Handle for 17mm welder cable connectors, dunno if this is proprietary for single type of welder or it's universal thing, created that for a friend and he seems pretty satisfied ;) Press the connector inside handle using vice, it will…
This is a replacement for the crank adjustment handle that the Forney AC/DC Arc Welder 314 uses. You will need an M3 x12 screw to act as a set screw to old the handle on to the adjustment bolt. and a #8 x 1 ¼ bolt with a #8 - 32 nut and a…
The adapter fits Tarlido cordless rotary tool from Amazon and is designed to sharpen electrodes @ 15°. I also purchased (from Amazon) Jingling diamond cutting wheels size 20mm. The rotary tool costs $13 and the 10-pack of diamond discs is…
This is a model for welders to practice tig welding anywhere. You use a sharpie in the holder and use a piece of paper to see how you do. If you press too hard/go to slow, the lines will be thick and bled. If you press too light/go too…
A simple plastic cap that can be used in place of the stock rubber cap supplied with the welder. Quick to remove and replace between jobs. I printed in PLA with a .4mm nozzle on Bambu X1C.
Gridfinity Bin for QianLi Macaroon Spot Welder Machine 3x5x5u Space for the leads Cut-out for easy access.
Replacement latch for the wire feeder cover on certain Panasonic robotic welders. The bolt holes are meant to be added later after the original mounting holes have been measured to accommodate any differences.
Spot welder station intended to ease the use of those cheap spot welders. Material required Probe Bracket: 2x M3x20 machine screws (hold the 2 half brackets together) 2x M3 nuts (hold the 2 half brackets together) 1 or 2 M3x25 machine…
You'll need two M4x6x6 patch plates (bonks), two M4 screws and two washers. Main box printed with supports. Pla/petg. Estimated printing time is about of 4 hours. The probes holder can be attached on either the left or right side. The…
I created this mod for upgrading the inexistent cooling of this spot welder, with a few solders the battery reach very fast 50ºC and still warm to many time until you can continue soldering batteries. You can use any fan you have, I…
This industrious gnome is on duty at the workshop! He wears a flip-down welding mask and thick gloves, standing hands-on-hip with a welding torch ready in the other hand. Chunky boots and a sturdy stance make him a perfect desk mascot,…
Case I made quickly a good while ago, I remember the holes for the cables werent quite big enough and I had to trim it with a knife, I made it a bit bigger before uploading, so thats untested, but regardless it works. can be glued…
This is an overbuilt 3D pen designed to be used for "welding" 3D printed parts together using 1.75mm filament. This project is funded by Hack Club as a part of the Highway program. This design uses a CHC Pro hotend and a custom Orbiter…
Made in Autodesk Inventor (ipt file included)
43mm in diameter, 80mm long. easy to reassembly and so much better to use. I print it with 50 % innfill. PLA used. Feel free to change it to your needs.
Uses 2 screws to attach to a surface. Designed for the plastic welder to sit with the handle down but can work the other way.
i lost the retaining piece on my Uni Mig 165 Welder so i decided to make this works well for me! my bad the first version i put in was the wrong one
I had the door clips break on my and couldn't find a way to get them new so i reprinted them, i only needed the inner part as the outer piece was fine.
3DSWAY Filament Welder Adjustable Stand / Holder This is a custom adjustable stand for the 3DSWAY Filament Welder , designed to make welding filament easier, more comfortable and precise. Instead of holding the welder by hand, you can…
From CederB's Description: The kWeld from Keenlab is an excellent battery spot welder, especially as a desktop unit with the accompanying ultracapacitor bank kCap, the power supply module kSupply, and a compatible server power supply. But…
📦 Descrizione Questa è una custodia stampabile in 3D progettata per il modulo “ spot welder per batterie 18650 ” acquistato comunemente online. Il progetto nasce per proteggere e rendere più comodo l’uso del saldatore, fornendo un…
A simple tool to help with welding filament remnants. Printed with PETG (0.2mm layer, no support), I do not recommend PLA, if possible use a filament with higher temperature resistance. Designed for PTFE tubes that can be purchased on…
This is a revised stand to place on a tabletop/work area that fits the Awithz spot welder. Add holes for screws if needed, but seems to be a good stand to place where I want it when in use.
Just a simple stand/base for the spot welder from battery hookup . This base fits the taller V1 model they previously offered as well as the shorter V2 spot welder found here:…
Welder Garden Gnome – Industrial Charm Meets Whimsical Magic This isn't your average garden gnome—meet the Welder Gnome , the unsung hero of fairy yard maintenance and midnight metalwork! Some supports are needed. I used organic-style…
The original spot welder pens that come with my new AwithZ UF20B spot welder is a bit unwieldy due to its size, the one-handed pens that can be used with it (WP-240) is not very available hence this design. This help with having evenly…
WARNING! You are working on a device or machine that uses mains voltage (120-volt / 240-volt AC). Some welders use electronic components that retain a charge after being unplugged from source power. Ensure that any stored electrical power…
Portable Trail Welder (Karnage-Style) Trail welders are notoriously difficult to source in Europe. This project allows you to build a high-performance, battery-powered welder comparable to the US-made Karnage system. Powered by two…
🇫🇷 Description en français Cette boîte a été spécialement conçue pour accueillir une soudeuse par point portative. Son design compact et robuste assure une protection optimale des composants internes tout en facilitant le transport et…
Design Concept The Spot Welder PegBoard Holder is remix of the gridfinity holder by Matzetas. It should be universal fit for most portable spot welders. As it fits the one linked below:…
Dies ist ein HSW Remix für das Punktschweißgerät von AwithZ. Die Halterung wurde in Breite und Länge um 5% vergrößert aber ist immernoch nicht passgenau da das Original nicht die korrekte Form des Geräts hat, aber es verhindert dass das…
Angle base for the AwithZ P90C/ P120D, keeps leads closer to work, and makes it much easier to see the screen and access settings. Based on a similar model from diy500amp.com Included is a 25degree angle (my preference), fusion360 design…
Spotwelder holder for multiboard - printed with default settings without error
"Fusing the future of the Foot Clan!" Continue your descent into the Technodrome’s fabrication levels with Robot #5: The Welder . This sleek, specialized unit was seen joining components for Shredder's robotic army in the 1987 Teenage…
/!\ THIS IS A 3D MODEL NOT A PHYSICAL OBJECT /!\ This is a collection of 3d models ready to print the mask from Escape from tarkov. Measurements for the weldering base to hold to your head in the item pictures. For the physical item (3D…
Inspired by diy500amp.com but I needed additional space for accessories. It's a modular build. If you need all parts, after printing glue them together.
krabička pro kontroller z aliexpressu s LCD 50A . Dva závity M3 je nutno proříznout do plastu . Kryt na kabely/výfuk jsou dvě varianty . možno použít i držák na 3x3000F superkondenzátor 60mm průměr . Držáky jsou k sobě smontovýny m3…
Quick remix of a case for the GX590 / GX591 spot welder with a range of small dimensional tweaks and a few additions. Most notably, there's a mounting point for a 25mm fan right above the MOSFETs. This is optional - there's also a file…
IMPORTANT - THIS IS ONLY A CONCEPT AND NOT FUNCTIONAL DESIGN I spent a lot of time designing this box and at the end I figured out that regular 18650 batteries won't work due to huge current spikes at the moment of weld, but I figured…
Made a toolbox for Seesii Spot Welder SE-209. Now I can put all accessories into this box. No more searching around! There is quite a lot of accessories that come over the time. No searching aroiund any more... A really small…
Use 3x M3x8 Screw + Nut Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: DIY
This is a holder for the SUNLU filament welder designed for the IKEA SKÅDIS pegboard system. It keeps your filament welding tool organized, easily accessible, and securely stored on your pegboard. Features: SKÅDIS compatible mounting…
Specifically engineered for portable transistor spot welders, this stand transforms a loose handheld unit into a professional, stationary workstation. Why This Design? Hobbyist spot welders are often lightweight, leading them to slide…
Stojan na bodovacku aku clanku DOCREATE a prislusenstvi. Stand for a cordless welder DOCREATE.
Printed in PET, 0.2mm, 25% gyroid. support @ 25 deg Screw together with 4x 3.5 x 25mm wood screws Button inserts, lead protectors
Questo attrezzo è molto utile a saldare le due estremità dei filamenti ATTENZIONE! Il filamento saldato avrà naturalmente una resistenza alle pieghe molto minore rispetto ad un filamento normale, in quanto l'atto di saldare, irrigidisce…
Context Lithium Iron Phosphate (LiFePO4) technology is evolving rapidly. While the energy density is slightly lower than traditional Li-Ion, LiFePO4 cells offer a significantly better price-per-kWh and a much longer lifespan (often 2000+…
Upgrade your battery hookup/chinese super capacitor spot welder with this stand that fully encloses any exposed bus bars and also holds the power supply neatly on the back! Print with 4 walls so it's a strong print.
