1 / 3
Aliexpress battery spot welder cooling upgrade (5015 fan blower)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aliexpress battery spot welder cooling upgrade (5015 fan blower)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this mod for upgrading the inexistent cooling of this spot welder, with a few solders the battery reach very fast 50ºC and still warm to many time until you can continue soldering batteries.
You can use any fan you have, I reused old LDO 5015 5V from a prusa mk3 because I can feed with 5V IN from usb cable.
Printing instructions
- 3 Perimeters
- 0.15mm layer height
- With supports
- Print the cap if you don't want drill yours, print this cap with PC/PA or at least ABS.
BOM
- 5015 blower
- 2x M3x18 bolts
- Wiring….
5V source

Drill the bottom cap (or print the new one)
