1 / 3
Aliexpress battery spot welder cooling upgrade (5015 fan blower) — zdjęcie 1
1 / 3

Aliexpress battery spot welder cooling upgrade (5015 fan blower)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Aliexpress battery spot welder cooling upgrade (5015 fan blower)

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I created this mod for upgrading the inexistent cooling of this spot welder, with a few solders the battery reach very fast 50ºC and still warm to many time until you can continue soldering batteries.

You can use any fan you have, I reused old LDO 5015 5V from a prusa mk3 because I can feed with 5V IN from usb cable.

Printing instructions

  • 3 Perimeters
  • 0.15mm layer height
  • With supports
  • Print the cap if you don't want drill yours, print this cap with PC/PA or at least ABS.

BOM

  • 5015 blower
  • 2x M3x18 bolts
  • Wiring….

5V source

Drill the bottom cap (or print the new one)

Tagi